Automatic High-Temperature Tape Pasting Machine for Battery Cells up to 150 × 150 mm WM-477

›

The WM-477 is a compact taping cabinet for small flat battery cells. The operator lays the cell on the located nest, the machine feeds high-temperature tape off a tensioned reel, cuts it and presses it onto the side the recipe calls for — all in one pneumatic stroke, at 1,500 to 1,800 pieces per hour and ±0.15 mm placement. It takes workpieces up to 150 × 150 mm and 1 to 8 mm thick, runs on a Mitsubishi PLC with touch screen, and the whole station is 500 × 700 × 540 mm and 60 kg — small enough to sit at the end of a cell assembly bench instead of taking a floor bay.

Specifications

Key features

• One stroke does the whole job — the machine feeds tape off the reel, cuts it to length and presses it onto the cell, so the operator only loads and unloads
• Sized for small cells — up to 150 × 150 mm and 1 to 8 mm thick, with ±0.15 mm placement accuracy quoted by the factory, at 1,500 to 1,800 pieces per hour
• No vacuum pump and no air receiver in the cabinet — the factory builds it around a plain filter-regulator, which is why the whole station weighs 60 kg and fits in 500 × 700 mm of floor
• Foot pedal under the open knee space starts the cycle, so both hands stay on the cell rather than reaching for a button
• Located nest with a knurled adjustment knob and T-slotted table — set the tape position once and it repeats piece after piece instead of relying on the operator's eye
• Mitsubishi PLC and touch screen, SMC and AirTAC pneumatics, levelling feet and casters — spares your maintenance team can buy locally, and a machine two people can roll to a new cell line
• Free sample test — send us your cells and your tape, we run them on this machine and send you the video before you order

What it processes

• Insulation taping of small prismatic and pouch lithium cells up to 150 × 150 mm in pack assembly
• High-temperature tape on cell faces, edges and cover plates from 1 to 8 mm thick
• Small-format cell lines where a 400 × 400 mm taping station would be oversized for the part
• Harness shops adding a battery module cell to their build, needing one taping station rather than a floor bay

Suited for: small flat lithium cells, cover plates and insulation pieces up to 150 × 150 mm and 1 to 8 mm thick, taped at 1,500 to 1,800 pieces per hour with ±0.15 mm placement. It is the compact end of our flat-cell taping range: a 60 kg cabinet on casters with a 500 × 700 mm footprint, a foot pedal in the knee space, and a filter-regulator instead of a vacuum pump and air receiver.

Not suited for: cells or plates larger than 150 × 150 mm — that is where the WM-476 lithium battery tape sticking machine takes over, with the same 1–8 mm thickness, the same ±0.15 mm accuracy and the same 1,500–1,800 pcs/h, on a 400 × 400 mm table and a 150 kg frame. It is also not a rework tool: for taping cell edges and tab stacks by hand at a repair or prototype bench, with no bench footprint at all, use the cordless WM-4112 battery cell taping gun. And it is not a harness machine — round bundles need a rotating head, so use the WM-4136 extended-height taping machine for Φ3–40 mm, the WM-465 desktop continuous taping machine for Φ2–15 mm, or the WM-4105 spot taping workstation for programmed bands on Φ3–12 mm bundles. Cells thicker than 8 mm are offered as a customization — send the dimensions through custom machine sourcing and we will scope it.

Tell us the cell format, the material thickness and the tape you use. We run your samples on the actual machine and send you the trial video before you place the order.