Battery-Powered Tape Wrapping Machine, Handheld and Desktop WM-4111

Name: Battery-Powered Tape Wrapping Machine, Handheld and Desktop WM-4111
Brand: Wiromac
SKU: WM-4111

CE Certified HS Code 8479.89 Φ8–35 mm bundles and tubes

The WM-4111 is a tape wrapping machine that works three ways — handheld on a lithium battery worn in a belt bag, handheld on the 110/220 V adapter, or docked on its desktop stand with a foot pedal so both hands stay on the harness. It wraps wire bundles and tubes from Φ8 to 35 mm with tape 10 to 20 mm wide, which makes it the taping tool for final assembly areas, vehicle interiors and any station where cords and compressed air are not welcome.

Specifications

Function	Tape wrapping for wire harnesses and tubes, handheld or desktop, battery or mains powered
Taping diameter	8 – 35 mm
Tape width	10 – 20 mm
Max. tape outer diameter	90 mm
Speed	Manually controlled
Power	220/110 (V)
Weight	4 kg
Dimension	330 x 180 x 150 mm
HS Code	8479.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Lithium battery pack rides in a belt bag and powers the wrap head with no trailing cord — scaffolds, vehicle interiors and lines without a nearby socket stay workable
Desktop stand with foot pedal turns the same head into a small bench station, leaving both hands free to guide the bundle
Switching between handheld and desktop use is a docking move, not a changeover — one tool covers the bench and the site
Wraps tubes as well as wire bundles, Φ8 to 35 mm, with the open jaw hooking over mid-span sections
Free sample test — send 2–3 meters of your harness or tube, we wrap it and send you the video before you order

What it processes

Bench taping of small harness batches on the desktop stand with foot pedal
Cordless taping in power-restricted areas — final assembly, vehicle interiors, elevated platforms
Mixed workshops wanting one taping tool for both bench work and service calls

Suited for: taping where power is the constraint — battery-powered handheld work on installed harnesses and tubes, or desktop taping with the foot pedal when the job comes to the bench, Φ8 to 35 mm either way. The orange spiral wrap over the braided sleeve in the gallery is this machine’s own output. Not suited for: programmed spot bands — see the WM-4105 spot taping workstation — or continuous coverage of bundles beyond Φ35 mm, where the WM-4136 extended-height machine goes to Φ40 mm. If your work always sits at a powered bench, the corded WM-4110 does the same handheld job — the full lineup is in the tape wrapping category.

Wondering how long the battery lasts on your duty cycle? Ask — and send 2–3 meters of your harness, we wrap it on battery power and send you the video before you order.

Engineering knowledge

Choose and troubleshoot this process

How to Choose a Wire Harness Taping MachineChoose harness taping equipment by harness geometry, tape material, overlap, branch handling, wrap length, tension control and production mix.
Wire Harness Taping Defects: Causes and Corrective ActionsTroubleshoot tape gaps, excessive overlap, wrinkles, lifted edges, bundle deformation, tension variation and unstable start or finish positions.

Neither machine quite fits? New configurations reach our application engineers before they reach the catalog. Tell us your material and process; we will confirm what we manufacture and support, then recommend the right configuration. Get a tailored recommendation →

WM-4111 — common questions

What tape width does the WM-4111 run?

Tape 10 to 20 mm wide on rolls up to Φ90 mm outer diameter — the standard PVC harness tape format. The orange-wrapped harness in the gallery shows the finish that width class gives on a Φ10–20 mm bundle.

What can it not do?

It is operator-guided — no programmed band positions, no wire cutting, no stripping — and bundles outside Φ8–35 mm are beyond its jaw. For fixed-position spot bands or Φ40 mm main runs, the bench machines in the range do the job — see /products/tape-wrapping/ for the lineup.

What comes with the desktop setup?

The wrap head docks on a desktop stand and is triggered by the included foot pedal, so the operator guides the bundle with both hands. The kit also carries the lithium battery with its belt bag plus the 110/220 V adapter, so the same head goes back to handheld work in one move.