Cold-Knife Velcro and Webbing Tape Cutter, 80 mm Width, Shaped Ends WM-601

›

Get a quote for WM-601 →

The WM-601 cuts hook-and-loop, webbing and tape up to 80 mm wide to a set length from 10 to 9,999 mm with a cold knife, and can finish each piece with a straight, rounded-corner, circle or chamfered end. It feeds at 6,500 mm/min, holds ±0.5 mm, stops when the roll runs out, and keeps the length, count and speed settings through a power cut. 300 W, 220/110 V.

Specifications

Key features

• Four end shapes from one machine — straight, rounded corner, circle and chamfered — so Velcro straps come off ready to sew without a second die-cutting step
• Cold knife with adjustable stroke rate for thickness; no heater, so no melted edge on hook-and-loop or on webbing that must stay soft
• Set length, quantity and speed on the panel; the settings survive a power cut and the machine stops itself when the roll runs out
• 80 mm width and 10–9,999 mm length cover strap, band and label work; ±0.5 mm on length
• 300 W on 220 or 110 V — we set the voltage for your country and ship the manual in English

What it processes

• Hook-and-loop straps and webbing cut to length with rounded or chamfered ends
• Shops cutting the same tape by hand who now need a counted batch every day
• Label, band and strap work up to 80 mm wide that does not need a sealed edge

Suited for: tape and webbing ≤ 80 mm wide, cold cut to length, with straight or shaped ends. Not suited for: stacked take-away and a heat blade — WM-579. Wider angled webbing — WM-566. Rotary-die Velcro rolls — WM-589. Ultrasonic sealed shapes — WM-596.

Send 2–3 metres of the actual tape. Width and thickness decide the knife setting, not the product name on the roll — we cut your sample on video before you order.