Rotary Jacket Stripper, Ø10–50 mm, 300 mm Stroke, Alternate Build WM-1233B
The WM-1233B is an alternate build of our Ø10–50 mm rotary jacket stripper, with the same specification as the WM-1233: 0–300 mm stroke, ±0.2 mm, 10–30 pieces a minute, 300 W, 115 kg. You present the cable end and a rotary head scores the jacket as a ring and pulls it off, with blade depth and clamping adjusted to your cable. It strips ends only — it does not cut to length. The 300 mm stroke is not a confirmed strip length: one configuration specifies a 100 mm maximum strip. Confirm the required strip length before ordering.
Specifications
| Stripping method | Rotary stripping |
|---|---|
| Stroke | 0 – 300 mm |
| Stripping diameter | Ø10 – Ø50 mm |
| Stripping tolerance | ±0.2 mm |
| Speed | 10 – 30 pcs/min |
| Power supply | 220 V, 50–60 Hz |
| Power | 300 W |
| Air pressure | 0.5 – 0.7 MPa |
| Dimensions | 1,400 × 330 × 420 mm |
| Weight | 115 kg |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- The rotary head cuts a ring around the jacket at a set depth; we adjust blade depth and clamping and inspect strand condition on your sample
- Ø10–50 mm and 300 mm of stroke for charging-cable and battery-lead ends; set depth once and every end repeats to ±0.2 mm
- Full guard over the head with a viewing window, and an English touchscreen with Program / Manual / System pages
- Mechanical jacket removal without intentional heating; residue and conductor condition are checked on your actual cable
- Same specification as the WM-1233, quoted separately; tell us which page you are looking at
What it processes
- Jacket end-stripping on Ø10–50 mm cable, with the required strip length confirmed for the selected configuration
- Rework next to a cutter that only does the long pieces
Suited for: jacket end-stripping on Ø10–50 mm cable, with 0–300 mm machine stroke, when a two-sided knife is chewing copper. Not suited for: cut-to-length — WM-1420. Ends under Ø25 mm and 200 mm — WM-1232. Scrap copper reclaim — a different class of machine altogether.
We set the voltage for your country and ship the English interface and manual. The other build of this specification is the WM-1233.
Machine stroke and usable stripping length are different: one configuration specifies a 100 mm maximum strip. Confirm the required strip length for your cable and configuration before ordering.
Engineering knowledge
Choose and troubleshoot this process
- Automatic vs Semi-Automatic Wire Processing EquipmentCompare automatic lines and semi-automatic wire-processing cells using batch size, changeover, process integration, inspection and labor content.
- Cut Lengths Drifting on a Full Spool: Pay-Off Tension, Straightener Bearings and MisfeedWhy a cut-and-strip machine that held length on a loose coil walks 10–20 mm once a heavy reel goes on, how misfeed detection works, and how to check reel tension, straighteners, feed grip and encoder calibration.
- How to Choose a Wire Cutting and Stripping MachineSelect a wire cutting and stripping machine by conductor size, cable construction, strip geometry, length tolerance, batch size and downstream process.
WM-1233B — common questions
How is this different from the WM-1233?
Same specification, alternate build — the guard, frame and screen layout differ, the numbers do not. WM-1233 is the other version. The two are quoted separately, so tell us which page you are looking at.
Does it cut the cable to length?
No. You present the end. Cut-and-strip from a reel is the WM-1420 or the in-line rotary WM-193.
Will it nick the strands?
The rotary head cuts a ring at a set depth; the specified stripping tolerance is ±0.2 mm. Correct blade depth and clamping remain essential. Send 2–3 metres of your actual cable and we run it on video and inspect the exposed strands before you order.
What is the longest strip it will do?
The specification stroke is 0–300 mm; the product notes also give 100 mm as the maximum strip length for one configuration. Write the pull-off you actually need on the quote and we confirm it on your cable.
Can I run 26 AWG PTFE on this?
No. It handles Ø10–50 mm. Fine PTFE is a different knife.
Blades and pads?
Rotary knives and clamp pads are the wear parts. Every quote lists them with unit price and the location they ship from.
Related machines in Wire Cutting & Stripping
Automatic Cable Cutting and Stripping Machine for 1–12 mm Sheathed Cable
Model WM-1306
Automatic Cable Cut and Strip Machine with 50-Segment Middle Stripping
Model WM-190
Automatic Cable Cutting Machine for 1–150 mm² Wire, Cable and Hose
Model WM-1222