Semi-Automatic Copper Foil Tape Wrapping Machine for Cable Shielding WM-463
The WM-463 wraps a copper foil shielding band around round cable up to Φ10 mm — the EMI shield wrap applied over jackets and branch points in signal and data harnesses. It runs two-layer copper foil tape up to 12 mm wide, winding one layer onto the cable while the second layer is taken up automatically for scrap recycling. PLC control and a stepper-driven wrap head hold each cycle at 1.2 to 2.0 seconds, for 1,200 to 1,500 pieces per hour. The benchtop frame draws 800 W at 220 V, needs 5 kgf/cm² of air and weighs 35 kg.
Specifications
| Model | WM-463 |
|---|---|
| Function | Copper foil tape wrapping for cable shielding |
| Enveloped diameter | Up to Φ10 mm — round wire and cable only |
| Copper foil tape | Up to 12 mm wide — two-layer tape, one layer taken up for scrap recycling |
| Efficiency | 1,200 – 1,500 pcs/h |
| Cycle time | 1.2 – 2.0 s per wrap |
| Control | PLC with touchscreen HMI — English interface with language toggle |
| Drive | High-precision stepper motor on a linear slide |
| Power supply | Reference configuration: 220 V / 50 Hz, 800 W |
| Air source | No less than 5 kgf/cm² |
| Dimensions | 550 × 360 × 390 mm |
| Weight | 35 kg |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8479.89 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Feed, wrap and scrap take-up in one 1.2–2.0 s cycle — an even shield band every time, instead of hand-rolled foil that varies by operator
- Two-layer tape handling winds the spare layer onto its own reel automatically, so the operator only presents the cable and presses run
- PLC plus stepper drive keeps wrap position and band length repeatable at 1,200–1,500 pcs/h across a full shift
- Touchscreen HMI with an English interface puts counters, cycle settings and fault query on one screen, in a 35 kg benchtop frame
What it processes
- Copper foil shield bands on data and signal cable assemblies before connector shells go on
- EMI shielding wraps at branch points and splice covers in wire harnesses
- Cable plants replacing hand-applied foil wrap on round cable up to Φ10 mm
Suited for: copper foil shield bands on round cable up to Φ10 mm — signal and data assemblies, harness branch points and splice covers where hand-rolled foil is too slow and too uneven. For other jobs and machine options: flat or ribbon cable, bundles above Φ10 mm, or PVC and cloth taping work — for bundle and PVC-tape jobs, pick the WM-4136 harness tape wrapping machine, which wraps Φ3–40 mm; the other tape wrapping machines in this category cover spot and handheld work.
Send 2–3 meters of your cable and a roll of your foil tape, and we wrap your actual samples on camera before you commit. Start your WM-463 quote with the tape width and the size or a photo of the part to wrap. We’ll use those to check the wrapping setup.
Engineering knowledge
Choose and troubleshoot this process
- How to Choose a Wire Harness Taping MachineChoose harness taping equipment by harness geometry, tape material, overlap, branch handling, wrap length, tension control and production mix.
- Two-Point Taping of Small Wire Coils: Check the Fixture Before the MachineA small-coil taping application analysis: distinguish wire diameter from bundle size, check head clearance and define a two-band trial.
- Wire Harness Taping Defects: Causes and Corrective ActionsTroubleshoot tape gaps, excessive overlap, wrinkles, lifted edges, bundle deformation, tension variation and unstable start or finish positions.
WM-463 — common questions
What exactly does the WM-463 wrap?
A copper foil band around round wire or cable up to Φ10 mm in diameter, at the position the operator presents to the wrap head — shield bands over jackets, branch points and splice areas. It is semi-automatic — insert the cable, trigger the cycle, and the machine wraps, cuts and recovers the scrap layer in 1.2 to 2.0 seconds.
Why does the copper foil tape need two layers?
The wrap mechanism is designed around two-layer foil stock — one layer winds onto the cable as the shield, while the other is pulled onto the take-up reel for scrap recycling, which keeps the feed path tensioned and continuous. Width can be up to 12 mm. If you are unsure whether your foil qualifies, send a roll with your cable samples and we run it.
What is it not suitable for?
Flat or ribbon cable and anything over Φ10 mm — the wrap head is built for round sections only. It also does not apply PVC, cloth or acetate tape; harness taping and spot taping belong to the other tape wrapping machines in this category.
Related machines in Tape Wrapping
Flat Battery Cell High-Temperature Tape Applying Machine, 150 × 150 mm
Model WM-477
Automatic PTFE Thread-Seal Tape Wrapping Machine with Fitting Feeder
Model WM-461
Automatic Tape Wrapping Machine for Thin Wire Harnesses, 3–10 mm
Model WM-4138