🌐 English ▾

4-Layer Cable End Stripping Machine for Ø0.5–7 mm Cable WM-1545

CE Certified HS Code 8463.90 Ø0.5–7 mm, 4 layers 1,150 pcs/h
Get a quote for WM-1545 →

The WM-1545 is a benchtop strip-only machine that removes up to 4 layers — jacket, shield, foil and inner insulation — from cables of 0.5 to 7 mm outer diameter in one programmed cycle. Stripping length runs 0 to 45 mm and both length and blade depth are set in 0.01 mm steps on the control panel, with 99 parameter sets stored for repeat jobs. Tungsten-steel blades, a 300 W electrical load and a 13.8 kg benchtop build support 750–1,150 pieces per hour. We confirm the bench connection for your site.

Specifications

ModelWM-1545
FunctionPrecision end stripping, up to 4 layers (strip only, no cutting)
Cable diameter range0.5 – 7 mm
Maximum stripping length0 – 45 mm
Stripping length setting unit0.01 mm
Cutting depth setting unit0.01 mm
Maximum stripping layers4 layers
Blades2 pieces, imported tungsten steel
Program storage99 parameter sets
Production efficiency750 – 1,150 pcs/h (depending on material)
Power supplyReference configuration: AC 220 V / 110 V, 50/60 Hz, 300 W
Dimensions / weight495 × 138 × 260 mm / 13.8 kg
Electrical configurationWe configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
HS Code8463.90 (common reference — final classification confirmed by your customs broker)
CertificationCE (certificate provided with shipment)

Key features

  • Strips jacket, braid shield, foil and core insulation in one cycle — each layer with its own programmed depth and length
  • 0.01 mm setting steps on depth and length allow fine adjustment; we check shield and conductor condition on your sample
  • 99 stored programs — recall a cable type by number instead of re-dialing settings between jobs
  • Tungsten-steel blades hold their edge on shielded and Teflon-class insulations far longer than HSS

What it processes

  • Shielded signal cable, sensor and RF cable ends where the shield must survive stripping intact
  • Multi-layer stripping for connector assembly — stepped strip lengths per layer in one pass
  • Electronics, medical-device and aerospace harness shops that log strip programs per part number

Suited for: precision end-stripping of shielded and multi-layer cable, Ø0.5–7 mm, where each layer needs its own depth and length — RF, sensor, medical and aerospace-grade wires. For other jobs and machine options: cable above Ø7 mm, strip lengths beyond 45 mm, cutting to length, or jacket-only work on plain thick cable. For cable up to Ø10 mm and strips to 60 mm, the WM-1225 intelligent automatic wire stripping machine is the same four-layer, 0.01 mm-resolution architecture one size up, with an automatically centring program-controlled clamp. For cutting to length on heavy cable, pick the WM-1450 thick cable cut and strip machine, the line machine for 10–150 mm² power cable — while rotary multi-layer coax work belongs on the WM-2208 rotary blade stripper, Ø1.5–18 mm, up to nine layers per end.

Send 2–3 meters of your cable — we program the layers, strip it on camera and send you the video with the exact parameter set before you order. For a WM-1545 quote, start with the wire or cable size and a photo or sketch of the end you need stripped. A finished end is a useful reference for choosing the setup.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-1545 — common questions

Does the WM-1545 also cut wire to length?

No — it is a dedicated stripping station for pre-cut wires. If you need measuring, cutting and stripping in one machine, see the automatic cut and strip machines in this category; many shops pair one cutter with this machine as the precision stripping cell.

What does "4-layer stripping" actually mean?

In one cycle the machine can make up to four programmed strip steps at different depths and lengths — for example outer jacket at 30 mm, braid shield at 20 mm, foil at 15 mm and core insulation at 8 mm — producing a stepped end for connector assembly. We check conductor condition on your sample.

How do I know the blade depth is right for my cable?

Depth is set digitally in 0.01 mm steps and stored per program, and we confirm achievable repeatability and conductor condition on your sample. Send us 2–3 meters of your cable and we program it, strip it on camera and send you the video plus the parameter set before you order.

Related machines in Wire Cutting & Stripping

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h