Rotary Blade Cutting and Stripping Machine for Braided and Shielded Cable WM-184X
The WM-184X cuts and strips shielded, braided and multi-layer cable from 0.75 to 30 mm² (up to Φ18 mm) using a rotary blade head with 2 or 4 circling cutters — the clean way to open a jacket and score a copper braid without nicking the cores underneath. Each layer is programmed separately on the 7-inch touchscreen with full or half strip, up to 1,500 mm half-strip on side A. Sixteen belt-drive wheels feed the cable without marking it, holding 0.002×L length tolerance at up to 1,500 pieces per hour.
Specifications
| Model | WM-184X |
|---|---|
| Function | Cutting, jacket stripping and rotary shield stripping |
| Processing range | 0.75 – 30 mm² |
| Max. cable diameter | Φ18 mm |
| Cutting length | 120 – 999,999.99 mm |
| Minimum total length for stripping | > 120 mm |
| Cutting tolerance | Within 0.002 × L (L = cutting length) |
| Stripping length (side A) | Full strip 1 – 200 mm, half strip 1 – 1,500 mm |
| Stripping length (side B) | Full strip 1 – 100 mm, half strip 1 – 300 mm |
| Rotary cutters | 2 or 4 pieces, white steel or tungsten steel (optional) |
| Blade material | Imported high-speed steel |
| Production rate | 1,500 pcs/h (depending on wire length and size) |
| Drive method | 16-wheel drive — feeding stepper motor, blade holder servo, rotary knife servo; full servo optional |
| Wire feed method | Belt feeding — no embossing or scratches on the cable |
| Roller height adjustment | Digital adjustment of pressure roller height |
| Display | 7-inch touchscreen |
| Power supply | Reference configuration: 220 VAC 50/60 Hz (110 V 50/60 Hz optional) |
| Air pressure | 0.5 MPa (clean air source) |
| Dimensions | 128 × 48 × 135 cm (L × W × H) |
| Net weight | 180 kg |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Rotary blades circle the cable to score braid and shield layers cleanly — no torn strands or nicked cores the way drag blades leave on shielded cable
- Program each layer separately — jacket, braid and insulation each get their own diameter, strip depth and full or half strip setting
- Half strip up to 1,500 mm keeps the shield captive on the cable for fold-back grounding and later termination steps
- 16-wheel belt feeding grips soft jackets over a long contact area, so even silicone-sheathed cable comes through without pressure marks
What it processes
- Shielded power and signal cable for EV, energy-storage and industrial harnesses (0.75 – 30 mm²)
- Braided screen cable where the shield must be scored and removed or folded back cleanly
- Multi-layer jacketed cable that a standard single-blade stripper cannot open layer by layer
Suited for: braided and shielded cable from 0.75 to 30 mm² (up to Φ18 mm OD) where the shield layer must be opened cleanly — EV and energy-storage signal cable, screened control cable, multi-layer jacketed wire. For other jobs and machine options: plain unshielded hookup wire — for that, pick the WM-167 benchtop cut and strip machine, which runs 0.1–10 mm² wire far faster — while micro-coax belongs on the WM-2106A multi-layer coax stripper, Ø0.81–7 mm.
Shielded cable varies a lot in braid density and jacket hardness. Send 2–3 meters of your actual cable and we program the layers and run it on this machine on video before you commit to the order. Ask us to quote the WM-184X using your cable part number or outside diameter and a photo of the prepared end. That gives us a starting point for checking the stripping setup.
Engineering knowledge
Choose and troubleshoot this process
- Automatic Wire Cut-and-Strip Machine Price Guide: Rollers, Belts and Rotary HeadsCompare automatic wire cutting and stripping quotes by feed and head configuration, landed cost, included tooling and cost per accepted wire.
- Coaxial Cable Stripping Defects: Causes and Corrective ActionsTroubleshoot cut braid strands, torn foil, marked dielectric, nicked centre conductors, incomplete pull-off and inconsistent strip length.
- Rotary Coaxial Cable Stripping for FAKRA, RG58, RG174 and RG316Match FAKRA and RF connector preparation to the cable drawing. Compare three-step and multi-layer rotary stripping, then shortlist a machine by cable OD and length.
WM-184X — common questions
How does rotary stripping differ from a standard cut and strip machine?
A standard machine draws a fixed V-blade along the cable, which works on plain insulation but tears braided shields and can nick cores. The WM-184X spins 2 or 4 blades around the cable at a programmed depth, so the jacket or braid is scored evenly around its full circumference before it is pulled off — clean edges on every layer.
Can it leave the braid on the cable instead of removing it?
Yes. Half strip mode scores the layer and slides it forward without pulling it off — up to 1,500 mm on side A and 300 mm on side B. Operators use this to keep the shield captive for fold-back grounding or to protect cores during transport between stations.
When should I consider another machine?
It does not process micro-coaxial cable below 0.75 mm² — see the coaxial cable processing machines for that work. And for plain unshielded hookup wire, the standard cut and strip machines in this category run faster per piece at lower cost.
Related machines in Coaxial & Multi-Layer Stripping
Four-Blade Coaxial Cable Stripping and Twisting Machine for Ø1–9 mm
Model WM-2209
Automatic Short Coaxial Cable Cutting and 6-Layer Stripping Machine, Ø1–6 mm
Model WM-2506D
9-Layer Rotary Stripping Machine for Ø6–40 mm EV and Shielded Cable
Model WM-2420