🌐 English ▾

Selection guide

Automatic Wire Cut-and-Strip Machine Price Guide: Rollers, Belts and Rotary Heads

Compare automatic wire cutting and stripping quotes by feed and head configuration, landed cost, included tooling and cost per accepted wire.

Technical lead: Lao Xiaoyu (劳晓宇) · Senior Engineer
Content updated:

To compare automatic wire cutting and stripping machine prices, put each quote against the same finished lead, inspection criteria and production mix. A simple reel-fed bench machine, a belt-feed machine and a rotary stripping system can belong to different quote tiers because they solve different problems. Establish the right configuration before comparing the prices.

Three quote tiers by machine configuration

Quote tierWhen to shortlist itWiromac example and the item to check
Bench cut and stripSingle-core wire from a reel, with straight end stripping and limited downstream handlingWM-167 lists 0.1–10 mm². Check guide, blade and take-off requirements for the wire and length mix.
Belt feed and jacket strippingA sheathed cable that needs stable traction and a defined jacket and core preparationWM-164 lists belt feeding and 0.75–30 mm². Check the jacket and inner-core steps required by the drawing.
Rotary head for layered cableA shield or jacket that needs controlled cutting around the circumferenceWM-184X combines belt feed and rotary stripping up to Ø18 mm, with a stated total length above 120 mm for stripping. Check each stripping depth, shield condition and minimum part length.

The same machine can move into a different landed-cost tier when you add a powered prefeeder, coiler, marker, different tooling or on-site commissioning. Confirm which items the base quote includes and which are options.

Comparing with a Schleuniger EcoStrip quotation

The Komax Group’s EcoStrip 9380 specification lists an outside wire diameter range of 0.3–8 mm and optional interfaces for functions such as prefeeding, marking and output handling. For a single-core job, ask both sellers to quote against the same cable and document how their offered configuration performs the full operation. For cable jackets or multiple layers, agree on which layers and ends must be prepared and whether a downstream station is required.

Compare cost per accepted lead

Request a dated, itemized quotation with the same currency, destination and delivery terms. Confirm the included blades and guides, spare parts, commissioning, training, warranty scope and quoted lead time. Price the same handling equipment on both sides.

Measure the trial from loading and setup through the agreed inspection point. Count accepted leads after any reject and rework steps. For an agreed evaluation period, divide total machine and operating costs by the number of accepted leads. Include installed equipment cost, labor, inspection time, wear parts and scrap. Measure repeat batch changes if they take a material share of the shift.

Request an itemized quote for your wire set with a wire description and typical finished length. Add a sample or end drawing when you want the quote and trial to use the same acceptance criteria.

See the process in action

Demonstrations from the machines referenced in this guide. Click to watch the operation, then request a trial with your own material.

Questions engineers ask

How do I compare the prices of automatic wire cutting and stripping machines?

Ask for the same wire, output geometry and accepted parts per hour. Compare machine, tooling, accessories, freight, commissioning and support in the same currency and delivery terms.

Is a rotary stripping head the same as a belt-feed machine?

The feed moves the cable and the head performs the cut or strip. Some machines combine belt feeding with a rotary head. Specify the feed and head separately to compare quotes.

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h