🌐 English ▾

Selection guide

Choose a PTFE Thread-Seal Tape Wrapping Machine for Pipe Fittings

Compare operator loading, vibratory feeding and thread cleaning. See the WM-469 in operation and find out what to send for a fitting trial.

Technical lead: Lao Xiaoyu (劳晓宇) · Senior Engineer
Content updated:

The operator loads and removes each fitting. The wrapping head applies the tape, then the operator shows the wrapped parts.

Choose a PTFE thread-seal tape wrapping machine by the condition of the male thread and the way each fitting will reach the wrapping head. For clean parts that an operator can present individually, our WM-469 benchtop wrapper automates the tape wrap and cut. For bulk loading, the feeder must orient your exact part. When threads arrive with machining chips or residue, specify how they will be cleaned before taping.

Which machine fits your station?

Production requirementMachine to trialConfirm before ordering
Clean fittings, operator loading, a compact stationWM-469, with a standard nominal fitting range of 1/8–2 inches and standard tape widths of 5, 7, 10 and 14 mmGrip, clearance through the opening and the wrapped zone on both short parts and elbows
A recurring part that can be bulk-fedWM-461 with a vibratory feederOrientation, feed reliability and the tooling required for each part number
A combined step for cleaning and wrappingWM-466 with thread cleaningCondition of incoming threads and the level of cleanliness needed before wrapping

On the WM-469 the operator presents and removes the fitting. The machine winds and cuts the tape. The demonstration shows a sequence of separate fittings and the taped threads after removal. The short clip is useful for reviewing access and handling when you plan your station.

Start with the fitting drawing and actual tape roll

Nominal thread size is one field on the drawing. Also give the thread designation, exposed threaded length, nearby shoulders or branches, and an unobstructed side view. For a short plug there may be little body left to grip. An elbow can clear the opening with the threaded end yet interfere at its shoulder. Use the most constrained part in the batch for the first trial.

Send the production tape roll with its grade, width, thickness and spool dimensions. Ask us to confirm the grip, the setup for each part number and the wrap reference sample. For an initial quote, a fitting photo, nominal size and tape width are enough to start. Ask for a WM-469 quote and sample trial.

Also see the wrap-quality checklist and how to measure accepted fittings per hour.

Questions engineers ask

Does the WM-469 feed fittings automatically?

The operator loads and removes each fitting. The machine winds and cuts the tape. For bulk automatic loading, evaluate a bowl-fed WM-461 on your actual fittings.

Which PTFE tape widths are standard?

Standard widths are 5, 7, 10 and 14 mm. We offer customized feeding for 3–16 mm tape. Send the tape grade and thickness as well as the width.

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h