Semi-Automatic Paper Tube Cutting Machine, 25–200 mm Diameter WM-613

Name: Semi-Automatic Paper Tube Cutting Machine, 25–200 mm Diameter WM-613
Brand: Wiromac
SKU: WM-613

CE Certified 25–200 mm paper tube diameter

Our WM-613 recuts paper tubes into rings and shorter cores by rotating the tube while the cutter shaft does not rotate. It covers a specified tube-diameter range of 25–200 mm and wall thickness of 1–18 mm, with an automatic pneumatic chuck and pneumatic knife infeed. One operator loads and unloads the tube by hand; we test your material to confirm cut width, edge finish and production rate.

Specifications

Model	WM-613
Material	Paper tube and paper core
Operation	Semi-automatic; manual loading and unloading
Tube diameter	25–200 mm; diameter basis confirmed on the quote
Tube cutting length	<1,310 mm
Minimum cut width	1 mm
Wall thickness	1–18 mm
Cutting method	Paper tube rotates; cutter shaft does not rotate
Knife units	1 set
Knife infeed	Pneumatic
Clamping	Automatic pneumatic chuck
Cutting carriage travel speed	35 m/min
Controls	PLC and touchscreen HMI
Positioning drive	Servo motor, lead screw and linear guide
Blade material	Tungsten steel
Operators	1
Power supply	Reference configuration: 380 V, three-phase, four-wire
Total power	3 kW
Installation dimensions (L × W × H)	1,900 × 800 × 1,300 mm
Total weight	500 kg
Included accessories	2 cutting blades and 1 tool set
Compressed air pressure and consumption	Confirmed on the quote
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
Certification	CE (certificate provided with shipment)

Key features

Prepare rings and short cores from paper tubes with 1–18 mm walls. We match the cutting setup to your core diameter, coating and required finished width.
Reduce manual work at the clamp: the pneumatic chuck grips the tube automatically, while one operator handles loading and unloading.
Set lengths through the PLC and touchscreen, with a servo motor, lead screw and linear guide positioning the cutting carriage for repeat core orders.
Check the result on your own material before ordering: send us your paper tube and we return a cutting video, measured samples and the trial rate.
Prepare the machine for your team: we set the voltage for your country and ship the English interface and manual.

What it processes

Paper cores cut to width for label and adhesive-tape converting
Paper tube rings and short sleeves for packaging and assembly
Repeat paper-core lengths for printing and textile production

Our WM-613 prepares paper cores for the width needed by your next production step. The tube sits on a horizontal shaft and rotates during cutting. A pneumatic knife cuts through the wall, and the operator removes the finished sections by hand. The sample photos show rings and longer sections with coated outer surfaces; the demonstration includes a caliper check after cutting.

For a trial, send the paper construction, inside and outside diameters, wall thickness, tube length, finished widths, tolerance and target batch quantity. We show the cutting process and measured result on your material before confirming the configuration and output. The electrical specification and 1,900 × 800 × 1,300 mm installation dimensions also help you plan the machine’s position in your workshop. To get a WM-613 quote, tell us the material and its approximate width or outside diameter. If you know the target cut length, include it so we can check the setup.

Engineering knowledge

Choose and troubleshoot this process

How Short Can an Automatic Tube Cutter Cut?Separate programmed tube length from usable short-ring capacity. Check support, wall deformation, blade clearance, release and collection on actual material.
Cutting 316 Stainless Wire Rope to 6 Inches with WM-9323A U.S. customer sent 1/8-inch 316 stainless wire rope for a 152.4 mm cut trial. See the cut ends and the checks needed for ferrule fit and length.
Can One Cutter Process Bubble Wrap and Paper Rolls?Choose roll-to-sheet cutting for bubble wrap and paper by feed pressure, unwind control, complete separation and collection, rather than textile sealing.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-613 — common questions

What paper tube sizes can the WM-613 cut?

The specified tube-diameter range is 25–200 mm, wall thickness is 1–18 mm, tube cutting length is <1,310 mm and minimum cut width is 1 mm. Send both the inside and outside diameter, wall thickness, tube length and required finished widths. We confirm the diameter basis and tooling on the quote.

Does it load and unload the tubes automatically?

We supply this machine for manual loading and unloading by one operator. The chuck clamps pneumatically and the knife infeed is pneumatic. The demonstration shows the tube being cut on the horizontal shaft, followed by hand removal of the cut sections. For a production line with automatic material handling, use our custom machine service.

Is 35 m/min the production speed?

35 m/min is the cutting carriage travel speed. Finished output also depends on tube material, wall thickness, cut width, number of cuts and manual handling. We time a sample run at your required sizes and confirm the production rate on the quote.

Does the 1 mm minimum cut width mean 1 mm accuracy?

The 1 mm value specifies minimum cut width. Finished-length tolerance is confirmed on the quote after we measure cuts in your paper tube. Tell us the allowable variation and any requirements for edge finish or roundness.

Can we see the cut quality before ordering?

Yes. Send us your paper tube, including its coating or lining, and the required cut widths. We record the cutting and unloading, show the cut faces and measure the samples so you can assess the result for your next operation.

Can we use this machine for plastic or metal pipe?

We configure the WM-613 for paper tubes. For rigid PVC, PP or PE pipe from 1–50 mm, see our WM-591 rotary knife pipe cutter. For other materials and larger pipe, send the specification through our custom machine service so we can select and test the cutting process.

What power and air supply does it need?

The electrical specification is 380 V, three-phase, four-wire, with 3 kW total power. Compressed air operates the chuck and knife; required pressure and consumption are confirmed on the quote. We set the voltage for your country and ship the English interface and manual.

Which spare parts come with the machine?

The included accessories are two cutting blades and one tool set. For replacement blades and other wear parts, every quote lists them with unit price and the location they ship from.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.