Flexible Tube Cutting Machine, up to Ø38 mm WM-584B
Our WM-584B feeds flexible tube by a stepper-driven belt mechanism and cuts it to programmed lengths. It handles compatible corrugated, silicone and rubber tube up to 38 mm in diameter. The length setting is 0.1–99,999.9 mm, with specified accuracy of ±0.1 mm and a rate of 60–210 cuts per minute depending on length. Independent start/stop buttons sit beside the touchscreen. We test your tube to confirm finished length and cut quality before ordering.
Specifications
| Model | WM-584B |
|---|---|
| Function | Tube cutting to length |
| Applicable materials | Corrugated, silicone and rubber tube. We confirm suitability by sample test. |
| Maximum cutting diameter | 38 mm |
| Cutting length setting | 0.1–99,999.9 mm |
| Specified cutting accuracy | ±0.1 mm |
| Cutting speed | 60–210 cuts/min, depending on cutting length |
| Control and feed | Color touchscreen and stepper-driven belt feed |
| Blade | Replaceable utility-style blade |
| Power supply | Reference configuration: AC 220 V |
| Rated power | 560 W |
| Dimensions | 650 × 480 × 420 mm (L × W × H) |
| Net weight | 66 kg |
| Gross weight | 78 kg (shown configuration), 88 kg (earlier datasheet), 84 kg (earlier specification). Confirm before ordering. |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| Certification | CE (certificate provided with shipment) |
Key features
- Prepare repeat tube lengths with stepper-driven feeding and touchscreen setup, reducing repeated manual measuring during a batch.
- Cut compatible corrugated, silicone and rubber tube into measured sections for repeat assembly jobs. We verify material suitability and cut quality on your sample.
- Start and stop production from separate physical buttons beside the screen, with an emergency stop on the same control panel.
- Prepare the machine for your operators: we set the voltage for your country and ship the English interface and manual.
- Plan blade and feed-belt replacements in advance: every quote lists them with unit price and the location they ship from.
What it processes
- Corrugated protective tube cut to closed assembly lengths
- Repeat cut-to-length batches of compatible rubber and plastic tubing
- Tube preparation for recurring appliance, cable and equipment assembly kits
Our WM-584B combines belt feeding and cut-to-length processing for flexible tubing. Enter the required length and batch count on the touchscreen, then use the separate physical start/stop buttons to control production.
The video shows translucent tube feeding from a separate payoff reel, the cut ends, and a finished piece checked against a ruler. We confirm the payoff setup on your quote.
Send tube material, outside and inside diameters, wall thickness and required lengths. We run the sample, measure finished pieces and show the cut ends on video before confirming the configuration.
For tube that must also be split along its length for harness installation, choose our WM-584 cutting and splitting machine. WM-584B is for cutting closed tube sections. To get a WM-584B quote, tell us the material and its approximate width or outside diameter. If you know the target cut length, include it so we can check the setup.
Engineering knowledge
Choose and troubleshoot this process
- Cutting 316 Stainless Wire Rope to 6 Inches with WM-9323A U.S. customer sent 1/8-inch 316 stainless wire rope for a 152.4 mm cut trial. See the cut ends and the checks needed for ferrule fit and length.
- Coated Steel Wire Rope Cutting: Check the End and Sleeve FitSpecify coated steel rope cutting by metal diameter, coating, strand containment and actual sleeve fit. Keep cutting acceptance separate from termination strength.
- Can One Cutter Process Bubble Wrap and Paper Rolls?Choose roll-to-sheet cutting for bubble wrap and paper by feed pressure, unwind control, complete separation and collection, rather than textile sealing.
WM-584B — common questions
How is this different from WM-584?
WM-584B cuts flexible tube to length. Our WM-584 also splits tube lengthwise. The two specify the same maximum 38 mm diameter, 0.1–99,999.9 mm length setting, ±0.1 mm accuracy and 60–210 cuts/min, but perform different operations. WM-584B has separate start/stop buttons beside the touchscreen. We quote the selected machine and required tube process.
Does WM-584B split tubing lengthwise?
WM-584B cuts tube to length without a lengthwise split. For slit protective sleeve, use our WM-584 flexible tube cutting and splitting machine. Send your tube and required finished section so we can demonstrate the correct process.
Does the maximum diameter apply to every material?
The specified maximum is 38 mm. Material, wall thickness and hardness affect cutting. Send samples and dimensions through our custom machine service for larger or uncertain sections. We confirm the configuration on the quote.
How do you check the shortest usable cut and length tolerance on my tube?
We run repeat cuts on your tubing, measure the finished pieces and confirm the working range and tolerance on the quote. The specification lists ±0.1 mm accuracy and a 0.1–99,999.9 mm length setting. The trial establishes the shortest usable cut on your material.
How fast will it run our lengths?
The specified range is 60–210 cuts per minute, depending on cutting length. We time the cutting cycle with your actual tube and required lengths. For occasional small batches, a suitable manual cutter may be enough; this machine is intended for recurring measured batches.
What is the electrical requirement?
The specified supply is AC 220 V and rated power is 560 W. We set the voltage for your country and ship the English interface and manual.
How do we order wear parts?
For spare blades and feed belts, every quote lists them with unit price and the location they ship from. We identify replacement parts for the selected WM-584B configuration and supply the changeover instructions.
Related machines in Tube, Tape & Material Cutting
Hot and Cold Webbing Shape Cutting Machine, 45–135°
Model WM-566
Automatic Plastic Tube Cutting Machine for Ø4–30 mm Tube
Model WM-606
Automatic Braided Sleeve Taping and Cutting Machine for OD 8–30 mm Tube
Model WM-177