Automatic Tube Inkjet Marking and Cutting Machine, Ø1–30 mm WM-590
Print batch codes or part numbers and cut Φ1–30 mm tubing to length in one pass. With the WM-590 inline inkjet marking and cutting machine, your team collects identified tube sections at the conveyor and sends them straight to kitting.
Specifications
| Model | WM-590 |
|---|---|
| Function | Inline inkjet marking and automatic tube cut-to-length |
| Cutting diameter | Φ1 – Φ30 mm |
| Length error | ±0.5 (unit and acceptance method confirmed on the quote) |
| Speed | 20 – 40 pcs/min |
| Cutter power | 1 kW |
| Feeding motor | Servo motor |
| Feeding method | Crawler feeding |
| Blade moving method | Digital control motor |
| Feed stroke | 40 mm |
| Output method | Conveyor belt output |
| Control system | Motion control board plus human-machine interface |
| Printer configuration | Print head, controller, ink, print height, line count and interfaces confirmed on the quote |
| Power source | Reference configuration: 220 V, 50–60 Hz |
| Power | 2,000 W |
| Air pressure | 0.5 – 0.7 MPa |
| Published machine-body size | 1,020 × 530 × 1,300 mm, excluding protrusions; final line footprint confirmed on the quote |
| Published weight | About 270 kg; configured shipping weight confirmed on the quote |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8461.50 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Send marked tube sections down the outfeed conveyor without moving loose pieces to a separate printer. The tube passes under the inkjet head before the blade cuts it to length.
- Feed the tube over a long belt contact area. Opposed crawler belts grip the stock while the servo drive advances the programmed length toward the cutter.
- Keep the code with the job as orders change. The English interface puts order number, cut length, print content and planned quantity on one screen.
- Review the printed code and cut end before ordering. We run your tube and check readability, ink adhesion, print position and the finished end together.
- Plan consumables and wear parts before production — every quote lists them with unit price and the location they ship from
What it processes
- Cutting and lot-marking plastic, PVC and similar tube for harness, appliance and equipment assembly
- Preparing identified pneumatic or fluid tube in counted, job-specific lengths
- Printing part numbers, batch codes or assembly references before tube lengths enter kitting
- Replacing separate cutting and manual labelling steps when production reaches recurring thousand-piece batches
Collect cut and coded tube in one pass. Enter the cut length, print content and quantity for each order. The outfeed conveyor delivers identified pieces for kitting, so your team does not have to carry loose sections to a separate marking station.
For other jobs and machine options: a few hundred simple, unmarked lengths that a stop and hand cutter can finish economically. For recurring automatic cut-to-length work without printing, use the WM-582 tube cut-to-length machine. For printed webbing, ribbon or flat tape rather than tube, use the WM-574P webbing printing and cutting machine.
For a first quote, share your approximate tube size and the text or code to print. If you need a sample trial, we can choose representative sizes and lengths with you, then show readability, ink adhesion, print position and the cut end on your material. We agree the unit and acceptance method for the stated ±0.5 length error on the quote.
Engineering knowledge
Choose and troubleshoot this process
- How to Choose a Tube and Pipe Cutting MachineChoose tube and pipe cutting equipment by material, diameter, wall thickness, rigidity, cut mechanism, tolerance, end quality and chip-control requirements.
- Cutting 316 Stainless Wire Rope to 6 Inches with WM-9323A U.S. customer sent 1/8-inch 316 stainless wire rope for a 152.4 mm cut trial. See the cut ends and the checks needed for ferrule fit and length.
- Coated Steel Wire Rope Cutting: Check the End and Sleeve FitSpecify coated steel rope cutting by metal diameter, coating, strand containment and actual sleeve fit. Keep cutting acceptance separate from termination strength.
WM-590 — common questions
What information do you need to configure the cutting and printing together?
For a first quote, send the tube material, approximate outside diameter and an example of the code. A short description is enough to begin. If you need to approve the print or cut before ordering, we can agree the trial checks for your material and show the code position, print quality and cut end together.
Which inkjet printer and ink are included?
Your quote lists the print head, controller, ink type, print height, line count, communication interfaces and consumables for your tube and code. This gives purchasing one configuration to compare and the production team a setup to review.
Will the printed code stay aligned with the cut length?
Set the cut length, print content and planned quantity on one job screen. If the code must sit a set distance from the end, tell us where it belongs. In a trial we check the print position and finished length together using your tube and agreed acceptance method.
Can the WM-590 run any tube within Φ1–30 mm?
Use Φ1–30 mm outside diameter to shortlist the WM-590. We match the guides, blade and ink to the tube construction and surface. If your stock is curved, reinforced or surface-treated, a sample of the production tube lets us check how it feeds, cuts and holds the mark.
What utilities and language setup are required?
The listed machine supply is 220 V, 50–60 Hz and 2,000 W, with 0.5–0.7 MPa compressed air. We set the voltage for your country and ship the English interface and manual.
How do we order replacement blades, ink and other wear parts?
Every quote lists them with unit price and the location they ship from.
Related machines in Tube, Tape & Material Cutting
Hot and Cold Webbing Shape Cutting Machine, 45–135°
Model WM-566
Automatic Plastic Tube Cutting Machine for Ø4–30 mm Tube
Model WM-606
Automatic Braided Sleeve Taping and Cutting Machine for OD 8–30 mm Tube
Model WM-177