Automatic Cold-Knife Tube and Strip Cutting Machine, 100 mm Width WM-611
Our WM-611 feeds heat-shrink tubing, PVC tubing and flat material through adjustable guides and a roller before cutting it to length with a cold knife. Its specified cutting width is 1–100 mm, with a length setting of 0.1–9999.9 mm and a rate of 7,200 cuts per hour depending on length. The LCD and keypad provide automatic operation, manual forward/reverse feeding and manual cutting for setup. We test your material to confirm the usable length, feed grip and cut quality.
Specifications
| Model | WM-611 |
|---|---|
| Cutting method | Cold knife |
| Cutting width | 1–100 mm |
| Cutting length setting | 0.1–9999.9 mm |
| Specified cutting rate | 7,200 cuts/h, depending on cutting length |
| Controls | Microcomputer, LCD and keypad; automatic/manual feed, forward/reverse jog and manual cutting |
| Power supply | Reference configuration: 220 V, 50 Hz |
| Dimensions | 415 × 380 × 410 mm |
| Weight | 34 kg |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| Certification | CE (certificate provided with shipment) |
Key features
- Replace repeated hand-measuring with roller-fed cutting: enter the required length, align the material in the guides and run the batch.
- Set up short or flexible material with forward/reverse jog and a manual cut before starting automatic operation.
- Arrange narrow strips in parallel within the 100 mm cutting width. We confirm the number of lanes and guide spacing using your samples.
- Prepare the controls for your operators: we set the voltage for your country and ship the English interface and manual.
- Plan blade and feed-roller replacements with the machine: every quote lists them with unit price and the location they ship from.
What it processes
- Repeat lengths of heat-shrink sleeving for wire-harness assembly
- PVC tubing and flat insulating material prepared for assembly kits
- Parallel cutting of compatible narrow strips after a feed and cut trial
Our WM-611 is a bench cold-knife cutter for recurring sleeving and strip jobs. The adjustable infeed guides align the material before the roller advances it to the blade. The demonstration shows parallel black sleeving being fed, cut and discharged.
Send the material, section or flattened width, required lengths, tolerance and batch frequency. We run your samples and show the feeding, cut edges and measured lengths on video before confirming the configuration. The cutting-width specification does not establish a round-tube diameter or metal-wire capacity.
This version uses an unheated knife. For a sealed edge on compatible braid or webbing, we offer the WM-568 hot-cutting machine. To get a WM-611 quote, tell us the material and its approximate width or outside diameter. If you know the target cut length, include it so we can check the setup.
Engineering knowledge
Choose and troubleshoot this process
- Cutting 316 Stainless Wire Rope to 6 Inches with WM-9323A U.S. customer sent 1/8-inch 316 stainless wire rope for a 152.4 mm cut trial. See the cut ends and the checks needed for ferrule fit and length.
- Coated Steel Wire Rope Cutting: Check the End and Sleeve FitSpecify coated steel rope cutting by metal diameter, coating, strand containment and actual sleeve fit. Keep cutting acceptance separate from termination strength.
- Can One Cutter Process Bubble Wrap and Paper Rolls?Choose roll-to-sheet cutting for bubble wrap and paper by feed pressure, unwind control, complete separation and collection, rather than textile sealing.
WM-611 — common questions
How do I check whether my tube fits the cutter?
Send the material and outside diameter, plus wall thickness or flattened width. We confirm the guide opening and cutting suitability on your sample. The published 1–100 mm figure is cutting width.
Does this machine heat-seal the cut ends?
This is the cold-knife configuration. For braided sleeve or webbing that needs a fused edge, use our WM-568 hot-cutting machine. We compare the edge finish using your material before selecting the process.
Can it feed several strips at once?
The photos and video show parallel black sleeving through separate guides. The usable lane count depends on strip width, thickness and feed behavior; we confirm it on the quote after testing your samples. The specified rate counts cuts, not an assumed number of finished pieces across multiple lanes.
How do you confirm usable cut lengths and finished tolerance?
We cut and measure your shortest and longest required pieces and confirm the usable lengths and tolerance on the quote. Use the 0.1–9999.9 mm programmed length range to shortlist the machine; the sample establishes what works on your material.
What production rate should we plan for?
The specified rate is 7,200 cuts per hour, depending on cutting length. We time a run at your required length and feeding arrangement. For occasional small batches, a suitable hand cutter and length stop may be enough; automatic feeding is more useful for recurring production.
Can we use it for metal wire?
Wire suitability depends on material, section and blade setup. Send these details through our custom machine service so we can test and select the cutting process. The 100 mm cutting-width figure is not a metal-wire capacity.
What voltage and spare parts will we receive?
The electrical specification is 220 V, 50 Hz. We set the voltage for your country and ship the English interface and manual. For spare blades and feed rollers, every quote lists them with unit price and the location they ship from.
Related machines in Tube, Tape & Material Cutting
Hot and Cold Webbing Shape Cutting Machine, 45–135°
Model WM-566
Automatic Plastic Tube Cutting Machine for Ø4–30 mm Tube
Model WM-606
Automatic Braided Sleeve Taping and Cutting Machine for OD 8–30 mm Tube
Model WM-177