Hydraulic Hose Fitting Crimping Machine with Dual Crimping Heads WM-578
The WM-578 swages metal fittings onto flexible hose the hydraulic way — two crimping heads on one 15 MPa power unit close segmented dies around ferrules, thin-walled metal hoses and pipe joints from 1 to 33 mm, at up to 4,000 crimps per hour. A 4.0 kW pump station with pressure gauge, oil-level sight glass and fan-cooled circuit keeps the oil temperature stable through full shifts, and die sets are interchangeable per fitting size, with custom dies made to your crimp profile.
Specifications
| Model | WM-578 |
|---|---|
| Function | Crimping and tightening of metal thin-walled hoses; pipe riveting and shrinking of metal pipes |
| Applicable range | 1 – 33 mm |
| Way of working | Hydraulic |
| Pressure | 15 MPa |
| Speed | Up to 4,000 times/hour |
| Power supply | Reference configuration: 220 – 380 V, 4.0 kW |
| Dimensions | 88 × 96 × 98 cm |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Two crimping heads on one hydraulic station — run two die sizes side by side, no die change between fitting types
- Segmented radial dies close evenly around the ferrule for a uniform 360° compression, not a flat squeeze
- Stable oil pressure with fan-cooled hydraulic circuit — temperature stays in range through continuous production
- One-button cycle with piece counter: tighten and release run from the front panel, English-labeled controls
- Die sets can be custom-made to your fitting geometry — send a drawing or sample fitting
What it processes
- High- and low-pressure oil lines, brake lines, engine oil and fuel supply hose
- Air-conditioning and power-steering hose assemblies
- Water hose, gas hose and cable joint ferrules with brass or steel fittings
- Pipe riveting and end-shrinking of thin-walled metal pipe
Suited for: swaging metal fittings onto flexible hose — oil, brake, fuel, A/C and water lines with ferrules and joints from 1 to 33 mm — and riveting or shrinking the ends of thin-walled metal pipe. For other jobs and machine options: cutting tube or hose to length — that job belongs to the WM-183 metal tube cutting machine (Φ1–30 mm copper, aluminum, stainless and armored pipe). Nor for crimping electrical cable lugs onto wire — copper lugs up to 120 mm² are pressed on the WM-3135T 35-ton cable lug crimping machine. Other tube jobs — corrugated conduit, heat-shrink, braided sleeve — run on the rest of the tube and pipe cutting machines.
Crimp quality is provable before purchase: send your hoses and fittings, we run them on this machine on video and return the crimped samples for your own pull and pressure tests. For a first WM-578 quote, describe the job you want the machine to do and share the material or a photo of the part. We’ll start with the operation and setup your job requires.
WM-578 — common questions
What fitting sizes does the WM-578 crimp?
The dies cover fittings and thin-walled metal hose from 1 to 33 mm diameter. Each die set matches a fitting size range, and with two crimping heads you can keep two sizes mounted at once. For a fitting outside the standard sets, dies can be custom-machined to your crimp profile — send us the fitting drawing or a physical sample.
How do I verify the crimp quality before buying?
Send us a batch of your hoses and fittings — we crimp them on the actual machine, video the run, and ship the crimped samples back so you can pull-test and pressure-test them in your own lab before you commit to the order.
Does it cut the hose too?
No — the WM-578 only crimps. Cut the hose to length first, then crimp the fittings on. For cutting the tube side, see the metal tube cutting machine linked below; we can quote both machines together as a hose assembly line.
Related machines in Component Assembly & Special Machines
Five-Station O-Ring Assembly and Inspection Machine for Plastic Parts
Model WM-9311
Automatic O-Ring Assembly and Lubrication Machine for Plastic Fittings
Model WM-9312
Fully Automatic Rotary O-Ring Assembly Machine for Molded Plastic Parts
Model WM-9306