🌐 English ▾

Figure-8 Power Cord Coiling and Twist Tying Machine, Alternate Build WM-4815B

CE Certified HS Code 8479.89 Cord OD ≤ 6.2 mm 1,500 pcs/h (theoretical)
Get a quote for WM-4815B →

The WM-4815B is an alternate build of the Φ6.2 mm figure-8 wind-and-tie station: same published envelope as the WM-4815 — pre-cut cord up to 6 m, winding distance 65–240 mm, single twist tie under 45 mm, theoretical 1,500 pcs/h, 800 × 600 × 1,400 mm — built as a separate unit and quoted separately from the WM-4815.

Specifications

ModelWM-4815B
Finished typeFigure-8 winding with a single tie
Suitable materialAC wires, DC wires, etc.
Applicable diameter≤ Φ6.2 mm
Applicable length≤ 6 m
Winding distance65 – 240 mm
Head length0 – 100 mm
Tail length> 0 mm
Bundled diameter≤ 45 mm
Suitable cable tieRubber core or coreless tie wire
Theoretical yield1,500 pcs/h
Number of turns and speedAdjustable
Main motorServo and stepper motor
VoltageReference configuration: 210 – 240 V, 5 A
Air pressure0.4 – 0.55 MPa
Size800 × 600 × 1,400 mm
Electrical configurationWe configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
HS Code8479.89 (common reference — final classification confirmed by your customs broker)
CertificationCE (certificate provided with shipment)

Key features

  • Same published figure-8 + single twist-tie envelope as the WM-4815 — Φ6.2 mm, ≤6 m, 65–240 mm winding distance, ≤45 mm tied bundle
  • Orange-and-white enclosed station with overhead transfer gripper that lifts the tied coil clear of the forming posts
  • Reel-fed twist-tie head wraps and cuts in one motion after the winding cycle
  • Forming posts on the rotary table set coil size without a tooling change
  • Head length 0–100 mm keeps plug ends outside the coil when the packing spec requires it
  • Free sample test — send your cut cords; we run them on this machine and send the video before you order

What it processes

  • USB, AC and DC power cords bundled after cut-strip-crimp or plug molding
  • Pre-cut leads up to 6 m and Φ6.2 mm packed as tied figure-8 coils

Suited for: pre-cut cord ≤Φ6.2 mm and ≤6 m wound into a figure-8 and closed with one twist tie — the same job as the WM-4815, in an alternate build. For other jobs and machine options: cord that still has to be measured and cut first — that belongs on the WM-4808; heavier cord up to Φ10 mm on the WM-4811 or WM-4822.

The letter B marks an alternate build, not a firmware option. The specification matches the WM-4815 line for line; the enclosure finish and transfer-gripper geometry differ, and each build is quoted on its own. Tell us which page you are looking at.

Send a box of your cut cords with the target coil size and tie position. We run them on this machine and send the trial video before you commit. To price the WM-4815B, send the cable size and the finished coil diameter you need. Those are the first checks for choosing a winding setup.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-4815B — common questions

How is the WM-4815B different from the WM-4815?

Published specifications are the same (Φ6.2 mm, ≤6 m, 65–240 mm winding distance, single twist tie, 1,500 pcs/h theoretical, 800 × 600 × 1,400 mm). This page and the WM-4815 are two builds of that specification, quoted separately — tell us which page you are looking at when you ask for a price.

Does the WM-4815B measure and cut the cord?

It winds and ties cord that is already cut to length. If measuring, cutting, figure-8 coiling and tying have to happen in one machine, the WM-4808 does all four for cable OD 3–12 mm and finished lengths of 3–10 m.

How many ties does it apply per coil?

One, at the waist of the figure-8. Two ties at separate points on a round coil is the WM-4800 (up to Ø10 mm, 70–180 mm tie spacing).

What is the largest cord it can wind?

Φ6.2 mm outside diameter, up to 6 m long — same published limit as the WM-4815. Heavier cord up to Φ10 mm belongs on the WM-4811 (figure-8 or round) or the WM-4822 (figure-8 down to 110 mm winding distance).

Is 1,500 pieces per hour guaranteed?

It is the source-listed theoretical yield shared with the WM-4815 sheet. Real output depends on cord length, turns, coil size and feed pace — we time a cycle on your cord during the sample trial.

Related machines in Winding, Coiling & Binding

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h