🌐 English ▾

Automatic 3-Core Cable Cutting Stripping Twisting and Tinning Machine WM-4710T

CE Certified HS Code 8463.90 3-core round or flat cable 1,700–2,000 pcs/h
Get a quote for WM-4710T →

The WM-4710T automatically cuts, strips, twists and tins three-core round or flat cable. It supports 2–9 mm stripping and tinning lengths, up to 50 mm core splitting and source-listed output of 1,700–2,000 pieces per hour.

Specifications

ModelWM-4710T
FunctionAutomatic cutting, stripping, twisting and tinning
Cable types3-core round or flat H03VVH2-F, H05WH2-F, H03VV-F, RVV and VFF cable
Stripping length2–9 mm
Tinning length2–9 mm
Maximum core splitting length50 mm
Productivity1,700–2,000 pcs/h
Air pressure0.5–0.8 MPa
Air consumption6 m³/h
Power supplyReference configuration: AC 220 V, 50 Hz
Power0.75 kW
Dimensions1,200 × 630 × 1,300 mm
Machine weight300 kg
Electrical configurationWe configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
HS Code8463.90 (common reference — final classification confirmed by your customs broker)
CertificationCE (certificate provided with shipment)

Key features

  • Integrates cable cutting, jacket preparation, core separation, stripping, twisting and solder tinning
  • Configured around three-core round and flat sheathed cable rather than loose individual wires
  • Adjusts stripped and tinned conductor lengths from 2 to 9 mm
  • Splits the insulated cores by up to 50 mm for spaced terminations
  • Uses separate processing modules so each stage can be checked during sample setup

What it processes

  • Three-core appliance and lighting leads prepared for PCB or terminal-block soldering
  • Flat or round power cable requiring separated, twisted and tinned conductors
  • Repetitive cable sets using H03VVH2-F, H03VV-F, RVV or VFF constructions
  • Harness production where cut length and both end treatments must come from one line

Suited for: three-core round or flat sheathed cable that must be cut, split, stripped, twisted and tinned in one production flow. For other jobs and machine options: parallel processing of loose individual wires — use the WM-4706W multiple-wire tinning machine — or a broader multicore two-end tinning job, where the WM-4706S is the relevant comparison.

The cable construction and fan-out drawing govern the setup. The line can split the cores by up to 50 mm and prepare 2–9 mm of conductor for tinning, but tooling still has to match the outer jacket, conductor insulation and core spacing. A trial should confirm that the jacket opens cleanly, the strands remain contained after twisting and the solder stops at the specified position.

If a finished lead also requires terminal crimping, the process boundary changes. The WM-462 five-wire tinning and crimping machine combines tinning and crimping for compatible individual wires. Send the cable and terminal samples before choosing between a tin-only line and a combined process. To get a WM-4710T quote, share the conductor size and show us the joint or finished end you need. We can use a photo to start the configuration review.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-4710T — common questions

Is the WM-4710T for loose wires or a sheathed three-core cable?

It is specified for three-core round or flat cable. The process opens and separates the cores before conductor stripping, twisting and tinning; it is not the loose-wire parallel-feed layout used by the WM-4706W.

What end dimensions can it produce?

The published stripping and tinning ranges are both 2–9 mm, with core splitting up to 50 mm. The sample drawing must also show jacket removal, conductor fan-out and whether both ends use the same dimensions.

How does it differ from the other tinning machines?

The WM-4706W processes up to ten independent 18–28 AWG wires in parallel. The WM-4706S is for multicore sheathed cable under Ø8 mm with two-end tinning. This model is the three-core round or flat cable line with splitting, twisting and tinning.

What should I send before requesting a quotation?

Send the cable standard or datasheet, 2–3 meters of cable, conductor count and colors, cut length, jacket and conductor strip drawing, solder specification, permitted untinned length and target output. A sample run confirms the tooling and solder result.

Can it crimp a terminal after tinning?

Terminal crimping is not part of this machine's stated process. If the job needs multiple wires to be tinned and crimped, review the WM-462 five-wire stripping, tinning and crimping machine and verify the wire and terminal samples first.

Related machines in Tinning, Soldering & Welding

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h