Multi-Wire Cutting, Stripping, Twisting and Tinning Machine, Up to 10 Wires WM-4706W
The WM-4706W runs up to ten independent 18–28 AWG wires through cutting, full or half stripping, twisting and single- or double-end tinning. It supports 8–1,000 mm cut lengths and 0.1–10 mm stripping and tinning ranges; production output must be confirmed against the wire count and process setup.
Specifications
| Model | WM-4706W |
|---|---|
| Function | Automatic cutting, full or half stripping, twisting and single- or double-end tinning |
| Wire count | Up to 10 independent wires |
| Wire range | 18–28 AWG |
| Cutting length | 8–1,000 mm |
| Stripping length | 0.1–10 mm |
| Twisting length | 3–10 mm |
| Tinning length | 0.1–10 mm |
| Air pressure | 7 kgf as listed; confirm the pressure value and unit before installation |
| Published productivity line | 2,000 pcs/h |
| Published capacity line | 20K/hour — confirm against sample configuration |
| Dimensions | 600 × 800 × 1,100 mm |
| Machine weight | 280 kg |
| Electrical configuration | For any electrical equipment included in the order, we configure the supply for your installation. The quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Feeds as many as ten independent wires through parallel processing lanes
- Selects single- or double-end tinning and full- or half-strip preparation
- Covers cut lengths from 8 to 1,000 mm for short internal leads and longer jumpers
- Sets stripping and tinning from 0.1 to 10 mm, with 3–10 mm strand twisting
- Separates the wire guides, stripping tooling and solder station for accessible setup checks
What it processes
- Parallel production of color-coded loose leads for electronic assemblies
- Independent 18–28 AWG wires prepared for PCB, switch or terminal-block soldering
- Short jumper sets requiring the same cut length and end treatment across several colors
- Single- or double-ended tinned leads supplied as a grouped production batch
Suited for: cutting and preparing up to ten independent 18–28 AWG wires in parallel, with selectable full or half stripping, twisting and single- or double-end tinning. For other jobs and machine options: a sheathed cable that must first be opened and split into cores — compare the WM-4710T three-core line and the WM-4706S multicore two-end line. The twisting on this machine is strand twisting at the wire end, ahead of the solder pot — if what you need is two wires laid into a twisted pair along the whole lead, that is a different process and the WM-4716 six-axis wire twisting machine does it six pairs at a time.
The parallel lanes reduce repeated handling when a harness needs the same family of loose leads in several colors. Each wire still has to stay inside the 18–28 AWG range and share a compatible program. Wire stiffness, insulation friction and the number of active lanes are verified together rather than assumed from gauge alone.
Published output statements for this machine are inconsistent, so neither figure is used as a sales promise. Our acceptance result records the tested wire count, piece length, one- or two-end process and measured batch time. That gives the buyer a useful production number tied to the actual job instead of a catalog maximum with unknown conditions. To get a WM-4706W quote, share the conductor size and show us the joint or finished end you need. We can use a photo to start the configuration review.
Engineering knowledge
Choose and troubleshoot this process
- Wire Tinning Defects: Causes and Process AdjustmentsDiagnose poor solder wetting, excessive wicking, solder bridges, uneven tin length, oxidation and strand deformation in wire tinning.
- How to Choose an Ultrasonic Wire Welding MachineChoose ultrasonic wire welding equipment by conductor material, gathered cross-section, splice geometry, weld power, tooling, recipe control and acceptance testing.
- How to Choose a Wire Twisting and Tinning MachineChoose wire twisting and tinning equipment by conductor construction, strip condition, tinning specification, flux control, finished-end geometry and automation level.
WM-4706W — common questions
Which input wires fit the WM-4706W, and which model handles multicore sheathed cable?
Its input is up to ten independent wires, each guided through a parallel lane. Use the WM-4710T for three-core round or flat cable, or the WM-4706S for multicore sheathed cable under Ø8 mm.
Why is there no guaranteed capacity in the page badge?
The source publishes two different output lines, 2,000 pcs/h and 20K/hour, without enough context to reconcile them. We therefore do not advertise a guaranteed rate. The trial result is reported for your actual wire count, cut length and selected end processes.
Can it half-strip the insulation for transport?
The source lists full or half stripping. Confirm which end retains the insulation slug, the required pull-off condition and whether tinning happens immediately or at a later station so the program and tooling match the intended workflow.
What samples and data are needed?
Send every wire color and construction, 2–3 meters per wire, AWG size, conductor material, cut length, both end drawings, solder requirement, number of simultaneous wires and target batch size. A video trial confirms feed alignment and finished tin length.
Related machines in Tinning, Soldering & Welding
Automatic 3-Core Cable Cutting Stripping Twisting and Tinning Machine
Model WM-4710T
Automatic Multicore Cable Cutting Stripping and Two-End Tinning Machine
Model WM-4706S
Automatic Multi-Core Cable Cutting, Stripping, Double-End Twisting and Tinning Line
Model WM-4715