High-Speed Cable Prefeeder for 60 kg Spools, up to 4 m/s WM-9153

›

Get a quote for WM-9153 →

The WM-9153 is a powered pay-off for wire and PVC cable of 0.5–10 mm² and up to Φ18 mm, taking spools to 600 mm diameter and 60 kg and feeding at 0–4 m/s. A proximity switch and a multi-speed inverter drive let it follow a fast cutter so the cutter's belts never pull against the reel — which is what keeps cut lengths from drifting as a heavy spool empties. It sits between the 50 kg WM-9150 and the 150 kg WM-9152.

Specifications

Key features

• 4 m/s pay-off keeps up with high-speed cutters, in the same speed class as the 50 kg WM-9150 with 10 kg more on the spool
• Proximity-switch loop control with multi-speed inverter — when the cutter stops, the feeder stops; no overrun, no slack pile
• Spools to 600 mm and 60 kg on a shaft with guide rollers and pulleys, so the cutter's feed belts see a free-running wire instead of a braked reel
• 0.5–10 mm² and up to Φ18 mm covers hookup wire through mid-size sheathed cable
• Guide rollers and pulleys adjust by lever for cable diameter; an air cylinder controls the dancer

What it processes

• In front of a bench or floor cutter running a reel up to 60 kg
• Wire, cable and PVC cable in the 0.5–10 mm² band on high-speed cut-and-strip lines

Suited for: 0.5–10 mm² / Φ18 mm cable off a ≤60 kg, ≤600 mm spool, into a fast cutter. Not suited for: 150 kg coils — WM-9152. 250 kg coils — WM-9334. Small bench spools — WM-9332.

Send the spool drawing — flange diameter, width, bore and full weight. Two 60 kg reels do not brake the same way, and we set the dancer for yours before shipment.