Automatic Cable and Tube Prefeeder with 20 kg Load Capacity WM-9120T
The WM-9120T prefeeds corrugated tube, water and gas hose, PVC tubing, copper or iron wire and cable into downstream cutting or stripping equipment. It supports 20 kg loads, a 1 m/s feed rate and ten speed settings with braking.
Specifications
| Model | WM-9120T |
|---|---|
| Function | Automatic tube, wire and cable prefeeding |
| Materials | Corrugated tube, water/gas hose, PVC tube, copper wire, iron wire and cable |
| Feeding speed | 1 m/s |
| Speed settings | 10 with brake |
| Load capacity | 20 kg |
| Power supply | Reference configuration: 220 V |
| Dimensions | 500 × 650 × 850 mm |
| Machine weight | 32 kg |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8479.89 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Supplies tube, hose, wire or cable to a separate cutting or stripping machine
- Offers ten feed-speed settings up to the stated 1 m/s rate
- Uses braking to control the material reel at a downstream stop
- Supports loads up to 20 kg on a compact mobile platform
- Includes a material sensor and feed rollers for demand-controlled handoff
What it processes
- Corrugated conduit feeding into automatic tube cutters
- Water, gas or PVC hose supply for programmed-length cutting
- Copper or iron wire prefeeding ahead of a cutter or stripper
- Mixed-material cells that need an upstream reel buffer
Suited for: demand-controlled prefeeding of corrugated tube, hose, PVC tube, wire or cable from loads up to 20 kg. For other jobs and machine options: a 50 kg general wire reel — use the WM-9150 — or low-tension small coaxial cable, where the WM-9105C provides the dedicated dancer arrangement.
Tube feeding is not identical to wire pay-off. A soft hose can flatten under excessive roller pressure, while corrugated conduit can pulse as ribs pass the drive. The sample trial sets the guide, grip and sensor response for the real material instead of assuming that one roller setting fits every listed input.
For a complete tube line, pair the prefeeder with the required model in the tube and pipe cutting range. The 1 m/s source limit is the prefeeder rate; the final line rate also depends on cut length, downstream cycle and how much buffer can be held between the two machines. For a WM-9120T quote, share what you need to feed and the size of the reel or coil it comes on. We’ll check how the unit would fit your line.
Engineering knowledge
Choose and troubleshoot this process
- How to Choose a Wire Prefeeder and Pay-Off SystemChoose a wire prefeeder or pay-off system by reel mass, line speed, acceleration, allowable tension, accumulation, dereeling control and downstream interface.
- Wire Feeding Problems: Causes and Corrective ActionsTroubleshoot cable tension spikes, reel overrun, loops, jerking, twist, feed slip, encoder mismatch and downstream cut-length variation.
WM-9120T — common questions
Which materials are listed for the WM-9120T?
The source lists corrugated tube, water and gas hose, PVC tube, copper wire, iron wire and cable. Send a coil or reel sample because surface friction, stiffness and minimum bend radius determine the roller and guide setup.
What are the stated load and speed limits?
The unit is specified for a 20 kg load and 1 m/s feed speed, with ten speed settings and a brake. Reel dimensions and material path still require confirmation before production.
When should I choose another pay-off?
Choose WM-9150 for general wire and cable reels up to 50 kg and speeds up to 4 m/s. Choose WM-9105C for Ø0.6–5 mm coaxial cable where a dancer-controlled tension-free loop is required.
What must be tested with my downstream cutter?
Test start-stop response, sensor position, roller grip, braking, material deformation and the buffer path at the longest and shortest programmed pieces. Provide the downstream machine model, line direction, speed and a representative reel.
Related machines in Wire Feeding & Pay-Off
Automatic Variable-Speed Wire Pay-Off Machine with 50 kg Reel Capacity
Model WM-9150
Automatic Wire Prefeeder for Reels and Loose Coils, 50 kg
Model WM-9309
Automatic Wire Pay-Off Stand for 150 kg Reels up to Ø700 mm
Model WM-9152