🌐 English ▾

Tension-Free Coaxial Cable Prefeeder for Ø0.6–5 mm Cable WM-9105C

CE Certified HS Code 8479.89 Ø0.6–5 mm coaxial cable Up to 2.5 m/s
Get a quote for WM-9105C →

The WM-9105C is a dancer-controlled, tension-free prefeeder for Ø0.6–5 mm coaxial cable ahead of intermittent cutting or stripping equipment. It feeds up to 2.5 m/s from reels up to 25 kg and combines two motors, sensing and straightening in one 830 × 550 × 950 mm unit.

Specifications

ModelWM-9105C
FunctionTension-free coaxial cable prefeeding
Cable diameter0.6–5 mm
Maximum feeding speed2.5 m/s
Reel load25 kg
ControlDancer pulley with sensor control
Integrated equipmentTwo motors and straightener
Power supplyReference configuration: 220 V, 50 Hz
Dimensions830 × 550 × 950 mm
Machine weight40 kg
Electrical configurationWe configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
HS Code8479.89 (common reference — final classification confirmed by your customs broker)
CertificationCE (certificate provided with shipment)

Key features

  • Builds a dancer loop between the reel and downstream process to isolate cable tension
  • Uses sensor feedback to supply material as the cutting or stripping machine consumes it
  • Covers small coaxial cable from 0.6 to 5 mm in diameter
  • Integrates a straightener and two-motor feed arrangement in one mobile frame
  • Supports reels up to 25 kg and line speed up to 2.5 m/s

What it processes

  • Prefeeding small coaxial cable into automatic cut-and-strip equipment
  • Tension isolation ahead of intermittent stripping or connector-preparation cycles
  • RF and antenna cable production where feed drag can disturb length or strip consistency
  • Mobile reel supply for a cell that changes cable batches during the day

Suited for: isolating the measuring or stripping machine from the pull of a 25 kg or lighter reel of Ø0.6–5 mm coaxial cable. For other jobs and machine options: a 50 kg general-purpose wire reel — use the WM-9150 variable-speed pay-off — or tube and hose supply, where the WM-9120T tube prefeeder is the relevant design.

The dancer is a process buffer, not just a guide pulley. It lets the prefeeder accelerate the reel while the downstream machine sees a smaller and more stable draw. That matters on intermittent coaxial operations, where a sudden reel pull can affect measured length, conductor position or a delicate multi-layer strip.

This unit does not replace the processing machine. Pair it with the required model in the coaxial cable processing range, then verify the two machines together at the fastest expected start-stop cycle. Reel dimensions, cable memory and the required path height are part of the acceptance setup. For a WM-9105C quote, share what you need to feed and the size of the reel or coil it comes on. We’ll check how the unit would fit your line.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-9105C — common questions

What does tension-free prefeeding mean?

The downstream machine draws from a controlled dancer loop instead of pulling directly against reel inertia. The sensor tells the prefeeder when to replenish the loop, reducing the load transmitted into the measuring and stripping process.

What reel and cable range does the WM-9105C cover?

It is specified for 0.6–5 mm coaxial cable, reels up to 25 kg and a maximum 2.5 m/s feed rate. Reel dimensions and hub geometry must still be checked before the shaft and retainers are finalized.

When should I choose WM-9150 instead?

Choose WM-9150 for general wire or cable reels up to 50 kg and line speed up to 4 m/s. WM-9105C is the smaller coaxial-specific choice when a dancer-controlled low-tension loop is the priority.

What data are needed to match it to my line?

Send cable OD and construction, reel weight and dimensions, maximum downstream speed, start-stop cycle, required loop height, line direction and a photo or drawing of the receiving machine. We verify the handoff and sensor response as a complete pair.

Related machines in Wire Feeding & Pay-Off

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h