🌐 English ▾

Automatic Corrugated and PVC Tube Cutting Machine for 4–60 mm Thin-Wall Tube WM-610

CE Certified Tube Ø4–60 mm 4,000 pcs/h
Get a quote for WM-610 →

Our WM-610 cuts corrugated tubing, PVC tubing and other thin-wall tube to a set length. The 10-wheel belt feed and digitally adjusted pressure-wheel height help set the grip for different tube sizes within the 4–60 mm range. A 7-inch color touchscreen controls setup. The specified output is 4,000 pieces per hour, with air pressure of 0.5–0.7 MPa required. We test your tube for feeding, surface condition and finished length before confirming the production setup.

Specifications

ModelWM-610
FunctionCut-to-length processing of corrugated tubing, PVC tubing and other thin-wall tube
Tube diameter range4–60 mm
Cutting length setting1–999999.99 mm
Cutting toleranceWithin 0.005 × L (L = cutting length)
Specified production rate4,000 pcs/h; actual rate confirmed for the tube and cut length
Drive arrangement10-wheel drive
Feeding methodBelt feeding to avoid feed marks and scratches on the tube
Pressure-wheel heightDigital adjustment
Display7-inch color touchscreen
Power supplyReference configuration: AC 220 V, 50/60 Hz; AC 110 V, 50/60 Hz optional
Air pressure0.5–0.7 MPa
Dimensions680 × 605 × 520 mm
Net weight80 kg
Optional functionsMES connection, IoT connection, position-specific inkjet marking and external auxiliary-equipment alarms
Motion controller1 unit
Feed drive belts8M × 2
Ball screwType 160 × 1
Stepper motorsType 86 × 2
Motor drivers6 A × 2
Toroidal transformer500 W × 1 (transformer rating, not total machine input power)
Linear guidesEHG15 × 2
Pneumatic cylinder1 unit
Bearings35 units
Switches2 units
Electrical configurationWe configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
CertificationCE (certificate provided with shipment)

Key features

  • Prepare repeat tube lengths without hand-measuring each piece: set the cut length on the touchscreen and use the 10-wheel belt feed to advance the material.
  • Adjust feeding pressure for the tube job: digital pressure-wheel height adjustment and belt contact help manage grip without concentrating it at a single feed point. We check surface marks and deformation with your samples.
  • Connect the cutter to the rest of your production process: modular interfaces support optional MES, IoT, position-specific inkjet marking and auxiliary-equipment alarms, quoted for the required setup.
  • Set up repeat work on the 7-inch color touchscreen. We set the voltage for your country and ship the English interface and manual.
  • Plan replacement blades and belts with the machine: every quote lists them with unit price and the location they ship from.

What it processes

  • Recurring cut-to-length batches of corrugated tube for cable and harness protection
  • Thin-wall PVC tube lengths for equipment assembly and protective sleeving
  • Tube preparation for repeat kitting jobs, with feeding and cut-end trials on the actual material

Our WM-610 prepares set-length pieces of corrugated and thin-wall PVC tube for repeat assembly work. Its belt feeding, 10-wheel drive and digitally adjusted pressure-wheel height let us set the grip for the material being processed.

Diameter alone does not define a tube-cutting job. Send the tube material, outside and inside diameters, wall thickness, cut lengths, tolerance and recurring batch quantity. We test feeding, surface condition and cut ends, measure the finished lengths, and return the trial video with the proposed setup.

The machine requires compressed air at 0.5–0.7 MPa. MES, IoT, position-specific inkjet marking and external auxiliary-equipment alarms are optional connections, not part of every configuration. Start a WM-610 quote with the outside diameter and cut length of your corrugated conduit. If the cut must land on a specific rib or valley, show us where on a photo of the tube.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-610 — common questions

Which tubes can WM-610 cut?

WM-610 is specified for corrugated tubing, PVC tubing and other thin-wall tube in the 4–60 mm diameter range. Send the material, outside and inside diameters, wall thickness and required lengths. We run your samples and show the feed, cut ends and measured length in a trial video.

How is WM-610 different from WM-606?

WM-610 specifies a 4–60 mm tube range, 10-wheel belt feed, 0.5–0.7 MPa compressed air, dimensions of 680 × 605 × 520 mm and a net weight of 80 kg. Our WM-606 has a standard 4–30 mm range, a custom 30–50 mm range, 14-wheel drive and no compressed-air requirement. We select the setup using your tube samples and production needs.

What does the cutting tolerance mean?

The specified tolerance is within 0.005 × L, where L is the cutting length. At a 100 mm cut length, that expression equals 0.5 mm. We agree the measurement method and check repeat lengths using your actual tube; corrugation, flexibility and feed grip affect the trial.

Will every tube run at 4,000 pieces per hour?

4,000 pieces per hour is the specified production rate. We confirm the working rate for your tube, cut length and handling arrangement on the quote rather than applying that rate to every job.

Does it need compressed air and which voltage is available?

Yes. Supply compressed air at 0.5–0.7 MPa. The electrical specification is AC 220 V, 50/60 Hz, with AC 110 V, 50/60 Hz available as an option. We set the voltage for your country and ship the English interface and manual.

Does the 1 mm length setting guarantee a usable 1 mm finished piece?

The control setting range is 1–999999.99 mm. A usable short part also depends on the tube diameter, wall construction, grip and cut-end requirements. Send your shortest required part so we can test it and confirm the working range on the quote.

Are inkjet marking and production-system connections included?

MES, IoT, position-specific inkjet marking and external auxiliary-equipment alarms are optional. Tell us which functions and interfaces the job needs; we identify the selected options on the quote.

Can it replace a metal-tube saw or cut thick-wall tube?

This configuration is for thin-wall tube, not metal sawing or an assumed thick-wall capacity. Send the material and cross-section through our custom machine service so we can select a suitable cutting process.

Is it worthwhile for an occasional batch of 1,000 pieces?

For occasional small batches, a suitable hand cutter and length stop may be enough. Automatic feeding becomes more useful when repeat orders keep an operator measuring and cutting. Send your batch frequency and lengths so we can assess the job together.

How do we order spare blades and feed belts?

Every quote lists them with unit price and the location they ship from. We match replacement parts to your machine configuration and supply the changeover instructions.

Your quote and delivery

Configuration and dispatch
Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language
We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video
Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts
For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support
One-year machine warranty and free remote video support for the life of the equipment.
Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.

Payment, shipping and warranty details →

Prepare your sample and acceptance criteria →

Related machines in Tube, Tape & Material Cutting

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h