Automatic Wire Cutting, Stripping and Double-End Crimping Machine, 1–4 mm² WM-363
The WM-363 cuts wire to length, strips both ends and crimps a terminal on each of them in one automatic cycle, covering terminal sizes from 1 to 4 mm². Two independent press stations feed from their own terminal reels, so each end of the lead can carry a different terminal — a fork on one end and a pin ferrule on the other, or a ring lug for an earth strap. The 580 kg floor-standing cell runs on 220 V and 0.5 to 0.8 MPa compressed air, replacing a cutting machine and two bench presses.
Specifications
| Model | WM-363 |
|---|---|
| Function | Cutting, stripping and double-end terminal crimping |
| Terminal size | 1 – 4 mm² |
| Air source | 0.5 – 0.8 MPa |
| Power supply | Reference configuration: 220 V / 50 Hz |
| Dimensions | 155 × 96 × 175 cm |
| Weight | 580 kg |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Both wire ends leave the machine terminated — no cut-and-strip station, two bench presses and the handling between them
- Two independent crimping stations with separate reel feeds put a different terminal on each end in the same pass — fork and pin, ring and receptacle, whatever the drawing calls for
- Covers the 1 to 4 mm² terminal class that dominates control cabinets, earth bonding and appliance leads
- Three-color light tower signals faults and empty reels from across the shop, so one operator can supervise several cells
What it processes
- Yellow-green earth leads with ring lugs, produced by the thousand for cabinets and appliances
- Control-panel jumpers carrying fork, pin or receptacle terminals on 1 – 4 mm² wire
- Double-ended appliance and lighting leads that currently pass through three separate stations
Suited for: high-volume double-ended leads in the 1 to 4 mm² terminal class — earth straps, control-cabinet jumpers and appliance wiring where both ends must arrive terminated and consistent. For other jobs and machine options: heavier lugs and ferrules — the double-end lug and ferrule machine covers 4–6 mm² — or jobs that end in a connector housing, which need the insertion models in the terminal crimping category.
Every unit is configured against your cable sizes and terminal specifications before it ships. Send 2–3 meters of your wire plus your terminal reels and we crimp your actual parts on this machine on video — with pull-test results — before you commit. To price the WM-363 for your job, start with the wire size and a terminal part number or photo. We’ll check which tooling to quote.
Engineering knowledge
Choose and troubleshoot this process
- 135.8 mm Shut Height Crimping Press Guide: Reusing Existing ApplicatorsCompare a new bench press and applicator package with a tooling reuse quote by checking shut height, base and ram interfaces, stroke and first-piece results.
- Can a Crimping Line Fit Different Terminals at Each End?Specify double-end crimping with separate end-A and end-B requirements, lead-length references, component feeds, changeover and finished-part inspection.
- Crimp Applicator Parts: Shut Height, Stroke and Tooling FitIdentify crimp applicator parts and separate shut height, press stroke and finished crimp height before reusing tooling or ordering a bench press.
WM-363 — common questions
Can each end of the wire get a different terminal?
Yes — that is the point of the two-head layout. Each press station has its own applicator and its own terminal reel, so the machine crimps, for example, a fork terminal on one end and a pin ferrule on the other in the same cycle, as the sample photos show.
What does changing over to a new terminal involve?
Each station carries its own applicator and reel, so a changeover means swapping those and recalling the wire program — the same routine as on a bench press, done twice. The machine is also built to order, so tell us your cable sizes and terminal specifications and we configure both stations to match before shipment.
When should I consider another machine?
It crimps open terminals onto wire ends — it does not insert the crimped wires into connector housings, tin them, or fit rubber seals. For those steps see the housing-insertion and tinning models among the terminal crimping machines in this category.
Related machines in Crimping & Connector Assembly
100 kN Semi-Automatic Servo Terminal Crimping Machine
Model WM-3110T
20 kN Semi-Automatic Servo Terminal Crimping Machine
Model WM-3102S
200 kN Semi-Automatic Servo Cable Lug Crimping Machine
Model WM-3120T