3-Ton Copper Tape Wire Splicing Machine WM-715
The WM-715 splices stripped wires by crimping a sleeve of continuous copper tape around the gathered strands — feeding, cutting and closing the joint in one cycle at a rated 3-ton crimp force. A digital panel gives an LED piece counter, tape-feed jog and switchable manual or foot-pedal triggering, and the low-noise drive lets the compact, bolt-down machine work right beside assembly benches. It replaces solder and pre-formed splice terminals on lamp, switch, sensor and heating-element connections.
Specifications
| Model | WM-715 |
|---|---|
| Function | Copper tape wire splicing — feed, cut and crimp continuous copper tape in one cycle |
| Crimping force | 3.0 T (rated) |
| Noise class | Ultra-quiet crimping drive for bench-side operation |
| Operation mode | Manual or foot-pedal trigger, selectable on the panel; pedal included |
| Tape feeding | Motorized gear feed with jog (Feed) key, running behind a transparent guard |
| Counter | Digital LED piece counter with zero, set and up/down keys |
| Cooling | Fan-cooled motor drive |
| Mounting | Benchtop unit on a bolt-down base plate |
| Electrical configuration | For any electrical equipment included in the order, we configure the supply for your installation. The quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- One trigger press feeds, cuts and crimps the copper tape — a finished splice every cycle with no pre-formed splice terminals to purchase or stock
- Digital control panel keeps the piece count honest across shifts and jogs the tape feed for quick reel changes; manual and pedal modes switch at a key press
- Low-noise crimping drive runs quietly enough to sit beside operators on the assembly bench instead of in a press room
- Compact bolt-down footprint — the smaller sibling of our 4-ton WM-716 for lighter, bench-scale splicing work
What it processes
- Splicing lamp, switch and sensor leads in appliance and lighting assembly
- Connections onto heating elements and thermosensitive components where solder heat is unwelcome
- Two-wire gathers and lead extensions in wire harness prefabrication that would otherwise need solder or splice terminals
Suited for: cold splicing of stripped appliance-gauge wires with continuous copper tape — lamp, switch, sensor and heating-element leads where solder heat or flux is unwelcome and pre-formed splice terminals cost too much per joint. For other jobs and machine options: crimping standard insulated or open-barrel terminals or any solder work — for terminals, pick from our terminal crimping machines; for metallurgical splices, use the WM-711 ultrasonic wire welding machine. For larger mechanical copper-band joints, consider the heavier WM-716 copper band splicer in the same category.
Send 2–3 meters of each wire in your splice combination, and we crimp your actual joints on this machine — with the result on video — before you commit to the order. To price the WM-715 for your job, start with the wire size and a terminal part number or photo. We’ll check which tooling to quote.
Engineering knowledge
Choose and troubleshoot this process
- 135.8 mm Shut Height Crimping Press Guide: Reusing Existing ApplicatorsCompare a new bench press and applicator package with a tooling reuse quote by checking shut height, base and ram interfaces, stroke and first-piece results.
- Can a Crimping Line Fit Different Terminals at Each End?Specify double-end crimping with separate end-A and end-B requirements, lead-length references, component feeds, changeover and finished-part inspection.
- Crimp Applicator Parts: Shut Height, Stroke and Tooling FitIdentify crimp applicator parts and separate shut height, press stroke and finished crimp height before reusing tooling or ordering a bench press.
WM-715 — common questions
How is the WM-715 different from the WM-716 copper band splicer?
Both crimp continuous copper tape around stripped wires in a single action. The WM-715 is the compact bench unit with a rated 3-ton crimp force, sized for appliance-gauge leads next to an operator. The WM-716 is the heavier 4-ton station for larger bundles and harder duty cycles. If your splice combination sits near the boundary, send samples and we run them on both.
What wires and copper tape does it take?
It runs continuous copper tape from a reel through the motorized gear feed and crimps it around stripped, gathered wires — typical work is two appliance-gauge leads joined side by side, as in the sample photos. Tape width and wire combinations are confirmed against your actual samples — send 2–3 meters of each wire and we crimp your joints on video before you order.
When should I consider another machine?
It does not crimp insulated or pre-formed terminals — that is a job for a terminal crimping machine — and it makes a mechanical joint, not a metallurgical weld. For welded splices, see the WM-711 ultrasonic wire welding machine (0.75–20 mm²) or the other wire soldering and welding machines beside this splicer.
Related machines in Crimping & Connector Assembly
100 kN Semi-Automatic Servo Terminal Crimping Machine
Model WM-3110T
20 kN Semi-Automatic Servo Terminal Crimping Machine
Model WM-3102S
200 kN Semi-Automatic Servo Cable Lug Crimping Machine
Model WM-3120T