🌐 English ▾

Shield Brushing Machine for Braided and Spiral-Served Cable, 50 mm Brushing Length WM-821

CE Certified HS Code 8479.89 Shielded wires (wound & braided shields)
Get a quote for WM-821 →

The WM-821 is a 7.5 kg benchtop brushing machine that combs open the shield of screened wire — both wound (spiral-served) and braided shields — over brushing lengths up to 50 mm. Its twin rotating brush wheels run in forward or reverse so the direction always opens the shield instead of tightening it, with wheel speed set by dial to suit each wire. A clear safety guard with a positioning function covers the wheels, and the unit runs on a low-voltage 24 V DC drive from ordinary bench mains power.

Specifications

ModelWM-821
FunctionBrushing open wound and braided wire shields
Applicable wiresAll shielded wires — winding (spiral-served) shielded wires and braided wires
Brushing length0 – 50 mm
RotationForward and reverse, speed adjustable
DriveReference configuration: 24 V DC motor drive, 50 – 60 Hz mains adapter, 1.5 A
Working currentDC 0 – 24 V, 3 – 5 A
Power cordReference configuration: Two-core power cord
Working environment-20 °C to +50 °C
Relative humidity60 – 85% RH
Weight7.5 kg
Electrical configurationThe machine side keeps its rated low-voltage supply. We configure the mains side of the adapter for your site and confirm the input voltage, phase, frequency, current and power cord with plug on the quote. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead timeYour quote confirms the machine configuration, included accessories and dispatch date.
Warranty and supportOne-year machine warranty and free remote video support for the life of the equipment.
Wear partsFor wear parts, every quote lists them with unit price and the location they ship from.
HS Code8479.89 (common reference — final classification confirmed by your customs broker)
CertificationCE (certificate provided with shipment)

Key features

  • Forward and reverse rotation — the brush wheels spin either way, so spiral-served shields unwrap with their lay and braided mesh combs open instead of being wound tighter
  • Dial-controlled wheel speed matches the brushing action to the wire — gentle on fine signal braid, firmer on coarse shield mesh
  • Clear safety guard with positioning function keeps fingers away from the rotating wheels while locating the wire end for repeatable results
  • 7.5 kg benchtop format with a 24 V DC drive and no compressed-air requirement. We confirm the mains connection for your site.

What it processes

  • Wound (spiral-served) and braided shielded wires after jacket stripping
  • Shield pigtail and fold-back preparation on signal and control cable before grounding or ferrule termination
  • Benchside shield opening in appliance, automotive and industrial harness assembly

Suited for: brushing open the exposed shield — wound or braided — on screened wire at the bench, with brushing lengths up to 50 mm combed straight for pigtails, fold-backs and ground terminations. For other jobs and machine options: brushing lengths beyond 50 mm or heavy shielded cable — for 10–200 mm openings on cable up to 100 mm², pick the WM-819 shielded cable braid brushing machine. It also does not cut the shield to length or fold it back — for inline brush, cut and fold-back on OD 3–9 mm cable, see the WM-181 shield braid cut and fold-back machine; for trimming the shielding layer on larger cable, the WM-192 pneumatic shield layer cutting machine cuts shield OD 3–16 mm.

Send 2–3 meters of your shielded wire and we brush your actual shield on video before you commit to the order. For a WM-821 quote, tell us the cable outside diameter and how the shield should look after processing. A photo of the end is enough to begin the fit check.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-821 — common questions

Which shield types can the WM-821 brush open?

Both main constructions — braided mesh shields and wound (spiral-served) shields — on any shielded wire whose jacket has already been stripped back. The brushing length is set anywhere up to 50 mm, and the exposed shield is combed straight in one pass.

Why does it need forward and reverse rotation?

A shield has a lay direction. Brushing a spiral-served shield the wrong way winds it tighter onto the core; brushing with the lay unwraps it cleanly. Selectable rotation lets you match the wheel direction to each wire's shield construction, and the speed dial fine-tunes the action so strands are combed open without being torn off.

What if my brushing length is longer than 50 mm or my cable is heavy-gauge?

This benchtop unit covers shield openings up to 50 mm. For brushing lengths of 10–200 mm or shielded cable up to 100 mm² — EV high-voltage cable included — step up to the WM-819 shielded cable braid brushing machine with twin rotating brush tracks.

Related machines in Shield Brushing & Processing

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h