🌐 English ▾

Selection guide

How to Measure Angled Webbing for a Webbing Cutting Machine

Specify the long edge, short edge and cut direction on a strap drawing. Compare two angle cutters and check the cooled strap in its buckle.

Technical lead: Lao Xiaoyu (劳晓宇) · Senior Engineer
Content updated:

Mark the measurement points before you request an angle-cut webbing sample. On a strap with one square end and one diagonal end, the long edge, centerline and short edge give three different cut lengths. A buyer can approve “150 mm” and still receive a tip that sits too far out of the buckle.

What does 150 mm mean on a 25 mm strap?

Lay the strap flat with the square end on a straight reference line. Imagine a 25 mm wide strap with the opposite end cut at 45° to the square end. If the long edge measures 150 mm, the short edge measures 125 mm and the centerline measures 137.5 mm. These are three dimensions of the same illustrative part. Circle the one your assembly uses and put the tolerance beside it. For a strap cut diagonally at both ends, draw both cuts and mark the two points to measure between.

Choose an angle cutter by the width at the required cut

Example buying requirementWiromac machine to checkWhat decides the fit
25 mm strap with a recurring trapezoid or pointed tipWM-566 programmable webbing cutterThe head adjusts from 45° to 135°. The listed limits are 100 mm for straight cuts and 50 mm for chamfers. Its video shows the rotating head in operation.
75 mm wide strap with a slanted tip, or a long strap that needs supportWM-594 hot-knife angle cutterThe listed limits are 170 mm width and 2,000 mm length. The supported outfeed keeps long pieces flat. Its gallery shows the cut ends. We match the blade angle to the drawing.

Check the tip where the strap will be used

Mark the visible face and feed direction on one sample. Two mirror-image tips can have identical lengths, yet only one threads into a buckle with the printed face up. After hot cutting, let the edge cool and lay the strap flat without stretching it. Measure from the marked end, then thread the tip through the actual slider. A hard bead can catch in the opening even when the length is correct.

Request a quote for your angled strap with the material, width and a sketch showing the end shape. A photo beside the buckle helps us choose which sample cut to show you.

See the process in action

Demonstrations from the machines referenced in this guide. Click to watch the operation, then request a trial with your own material.

Questions engineers ask

Where do I measure the length of a strap with a diagonal end?

Mark the dimension on the edge or centerline that matters to the assembly. With one square end and one diagonal end, the two side edges have different lengths.

Can a cutter rated for 100 mm straight cuts chamfer a 75 mm strap?

Our WM-566 lists 100 mm for a straight cut and 50 mm for a chamfer. For a 75 mm angled strap, we would evaluate the WM-594 against the end drawing and material.

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h