🌐 English ▾

Selection guide

Which Crimping Machine Fits Loose Terminals Supplied in Bags?

Compare a bowl-fed bench press with an automatic double-end crimping line. See what to quote for each terminal and how to count finished leads.

Technical lead: Lao Xiaoyu (劳晓宇) · Senior Engineer
Content updated:

If you already have stripped wires, a bowl-fed bench press can take the job of picking up and orienting each loose terminal off the operator’s hands. If wire arrives on a reel and each finished lead needs two terminals, price the complete cut, strip and crimp sequence. The first purchasing question is what you want coming out of the station: a crimped end or a finished lead.

Match the feed system to the part you buy

What arrives at your benchMachine to considerWhat the operator or tooling does
Prepared leads and bagged open-barrel terminalsOur WM-3242 bowl-fed bench pressThe bowl and track present the contact to a matched die. The operator presents the wire. The product video shows the transfer up close.
Reeled wire and selected loose closed-barrel terminals for both endsOur WM-3248 double-end line, specified for 0.3–4.0 mm² wireTwo bowls and grippers are configured for the two ends. The product video shows a mixed-feed demonstration build. Ask to see both of your actual contacts fed on the proposed setup.

Price the changeover as well as the press

Suppose a harness shop runs a ring terminal on Monday and a fork terminal on Tuesday. Even with the same wire size, one contact can nest inside the next in the bowl, or reach the die facing the wrong way. Ask which bowl, track, gripper and die are included for each part number. On a changeover, time from the last accepted piece of the first job to the first accepted piece of the next. That tells you what switching jobs costs on a short batch.

For a two-ended order, 500 finished leads require 1,000 accepted end crimps. A press counter reading 1,000 strokes does not tell you how many leads are packed. Compare the time from available stock to 500 inspected leads, including stripping, turning the lead, refilling and any rework. For the automatic route, include setup and inspection on the same basis.

Ask for pricing on a loose-terminal setup. A photo of the terminal as supplied, the wire size and whether you need one or both ends crimped are enough to start. If you already have the terminal part numbers, include them so we can itemize tooling in the first quote.

See the process in action

Demonstrations from the machines referenced in this guide. Click to watch the operation, then request a trial with your own material.

Questions engineers ask

Can two similar terminals share a vibratory bowl?

Sometimes. A small difference in the tongue or barrel can change how a terminal sits on the track. Run both part numbers and have the quote identify the shared and dedicated tooling.

How do I compare a bench press with a double-end line on output?

Count complete leads that pass the same inspection over the same elapsed time. Include wire preparation and the second termination on the bench route.

👋 Need help choosing a machine? Ask me about specifications, processes and sample trials.
Email
Wiro — Equipment Assistant Equipment guidance · quotation team replies within 12 h