Suspended Heat Shrink Conveyor Oven for Mid-Harness Sleeves, 1000 mm WM-6116

Name: Suspended Heat Shrink Conveyor Oven for Mid-Harness Sleeves, 1000 mm WM-6116
Brand: Wiromac
SKU: WM-6116

CE Certified HS Code 8419.89 Conveyor 0–6 m/min

Get a quote for WM-6116 →

Our WM-6116 is a suspended conveyor heating platform for sleeves positioned in the middle of a harness. Two frame-width configurations share a 1000 × 240 × 200 mm chamber, 5.4 kW rating and 380 V, 50 Hz supply. The listed range is 0–260 °C with a 0–6 m/min belt speed and a 20 kg load. We confirm where the heating region sits relative to the harness before ordering.

Specifications

Model	WM-6116
Machine dimensions (L × W × H)	1600 × 900 × 1200 mm; 1600 × 1200 × 1200 mm; see configuration table
Chamber dimensions (L × W × H)	1000 × 240 × 200 mm
Machine weight	100 kg; 110 kg; see configuration table
Conveyor speed	0–6 m/min
Power	5.4 kW
Conveyor load	20 kg
Conveyor belt material	High-temperature PTFE mesh belt
Heating temperature	0–260 °C
Heating / temperature control	Double-sided heating; 2 temperature-control sets
Heating elements	Far-infrared heating tubes
Hot-air circulation blower	Included
Conveyor belt guide	Included
Power supply	Reference configuration: 380 V, 50 Hz
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
HS Code	8419.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Set the suspended heating arrangement around the required harness region and confirm the span on the actual assembly.
Match heating exposure to the sleeve by adjusting conveyor speed over 0–6 m/min and recording the approved setup.
Carry work on the heat-resistant PTFE mesh belt with a listed 20 kg load; we confirm the loading pattern with the actual assembly.
We set the voltage for your country and ship the English interface and manual.
For wear parts, every quote lists them with unit price and the location they ship from.

What it processes

Localized sleeve recovery in the middle of a harness
Repeated heating of prepared harness branches
Conveyor heating with the harness positioned relative to a suspended heating region

Configuration selection

Choose the heater, working space, frame dimensions and electrical rating together. The selected configuration is confirmed on the quote.

Configuration	Heating space (L × W × H)	Heating temperature	Heating elements	Machine dimensions (L × W × H)	Chamber dimensions (L × W × H)	Machine weight	Power	Reference power supply	Heating / temperature control	Physical temperature controllers (parts list)
900 mm frame width	Confirmed on the quote	0–260 °C	Far-infrared heating tubes	1600 × 900 × 1200 mm	1000 × 240 × 200 mm	100 kg	5.4 kW	380 V, 50 Hz	Double-sided heating; 2 temperature-control sets	2
1200 mm frame width	Confirmed on the quote	0–260 °C	Far-infrared heating tubes	1600 × 1200 × 1200 mm	1000 × 240 × 200 mm	110 kg	5.4 kW	380 V, 50 Hz	Double-sided heating; 2 temperature-control sets	2

The WM-6116 matches a conveyor heating process to prepared sleeved assemblies. Heating space, loading pattern and residence time are selected together so the sleeve can recover while the surrounding assembly is checked.

The configuration table separates the documented builds. Choose the heater arrangement, frame and electrical rating together, then confirm the selected combination on the quote.

For an approval trial, send the complete assembly with the sleeve positioned. We film the heating pass and show the finished recovery before ordering. For a WM-6116 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.

Engineering knowledge

Choose and troubleshoot this process

Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-6116 — common questions

How do we select the working space?

Use the configuration table for the selected heated space and frame dimensions. We confirm the complete part, fixtures and sleeve positions against that build before ordering.

How do we set temperature and conveyor speed?

We run the actual sleeve on the complete assembly and adjust heating and belt speed to verify sleeve recovery and the surrounding insulation. The approved values and loading arrangement are recorded for the job.

Which configuration should we compare?

Compare WM-6107 for an adjustable heating span and WM-6116 for the frame-width configurations. The harness layout determines the required heating arrangement.

What is included in the electrical and spare-parts confirmation?

We set the voltage for your country and ship the English interface and manual. For wear parts, every quote lists them with unit price and the location they ship from.

Can we see our own assembly processed?

Send the sleeve material, starting and recovered diameters, sleeve length, complete part dimensions and expected batch volume. We film a trial and show the heated assembly before you confirm the machine.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.