Pneumatic Drawer Heat Shrink Machine for Sleeves up to Ø50 mm WM-685

Name: Pneumatic Drawer Heat Shrink Machine for Sleeves up to Ø50 mm WM-685
Brand: Wiromac
SKU: WM-685

CE Certified HS Code 8419.89 Sleeve Ø0–50 mm Heating area 100 × 120 × 74 mm

Our WM-685 heats prepared sleeves and cable joints in a drawer-format chamber. The specification lists a 0–50 mm sleeve diameter, 0–100 mm sleeve length and a 100 × 120 × 74 mm heating area. Heating and cooling times are adjustable. The machine is rated at 2.0 kW with a 220 V, 50 Hz supply and a 0.6 MPa air connection; we confirm the chamber and heater arrangement with your sample.

Specifications

Model	WM-685
Machine dimensions (L × W × H)	530 × 500 × 400 mm
Heating area (L × W × H)	100 × 120 × 74 mm
Machine weight	35 kg
Power	2.0 kW
Heating temperature	0–550 °C
Heating / temperature control	Resistance-wire heating
Heat shrink diameter	0–50 mm
Heat shrink length	0–100 mm
Air pressure	0.6 MPa
Power supply	Reference configuration: 220 V, 50 Hz
Heating construction (datasheet description)	Annular infrared heating; chamber and heater arrangement confirmed on the quote
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
HS Code	8419.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Bring repeat small assemblies into an enclosed heating area and set separate heating and cooling times.
Use application-specific replaceable chambers when different joint shapes need a different heating arrangement.
Match the chamber to the complete cable joint so sleeve recovery can be checked together with nearby insulation.
We set the voltage for your country and ship the English interface and manual.
For wear parts, every quote lists them with unit price and the location they ship from.

What it processes

Heat shrinking pre-positioned sleeves over cable joints
Batch preparation of terminal insulation sleeves
Repeated local heating jobs using an application-specific chamber

The WM-685 uses a drawer-format heating area for prepared cable joints. A trial establishes the chamber arrangement, heating duration and cooling duration for the actual sleeve and the insulation around it.

Send the joint drawing, sleeve material, outside diameter and required heating length. We confirm clearance and utilities, then show the finished part before the machine configuration is agreed. For a WM-685 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.

Engineering knowledge

Choose and troubleshoot this process

Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-685 — common questions

What workpiece size fits?

The listed sleeve range is 0–50 mm diameter and 0–100 mm length, with a 100 × 120 × 74 mm heating area. Send the complete joint and connector dimensions so we can confirm clearance and the chamber setup.

Which heating construction is supplied?

The specification describes resistance-wire heating and the process description also refers to annular infrared heating. We confirm the selected heater and chamber construction on the quote and demonstrate it with the actual sleeve.

What utilities are needed?

The listed supply is 220 V, 50 Hz with 2.0 kW machine power and 0.6 MPa compressed air. We confirm the country supply and workstation connections on the quote.

How is this different from a conveyor oven?

The drawer format suits localized joint heating in a chamber. For sleeves carried continuously through a heated passage, compare WM-691 and choose by the complete workpiece size and loading method.

How do we approve the process?

Send the sleeve and complete joint. We show the heated part, the cooling sequence and the finished recovery on video before ordering. For wear parts, every quote lists them with unit price and the location they ship from.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.