Electric Hot-Air Heat Shrink Station for Sleeves up to Ø45 mm WM-684

Name: Electric Hot-Air Heat Shrink Station for Sleeves up to Ø45 mm WM-684
Brand: Wiromac
SKU: WM-684

CE Certified HS Code 8419.89 Sleeve Ø0–45 mm Airflow 580 L/min

Our WM-684 heats pre-positioned sleeves with a resistance heater and an adjustable built-in blower. The specified sleeve diameter is 0–45 mm, airflow is 580 L/min and the temperature setting is 0–450 °C. Sensor, foot-pedal and timed operation support repeated bench jobs. We test the sleeve, joint and cable assembly to set the heating time and nozzle arrangement.

Specifications

Model	WM-684
Machine dimensions (datasheet, L × W × H)	445 × 240 × 338 mm
Machine weight	17 kg
Power	3 kW
Heating temperature	0–450 °C
Heating / temperature control	Resistance-wire heating
Heat shrink diameter	0–45 mm
Heat shrink length	0–60 mm or 0–100 mm
Air volume	580 L/min (adjustable)
Air outlet options	L-shaped or Y-shaped; L-shaped standard
Power supply	Reference configuration: 220 V, 50 Hz
Machine dimensions (English specification, H × W × D)	445 × 240 × 338 mm; confirm dimensions before ordering
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
HS Code	8419.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Bring hot air to sleeves up to Ø45 mm while the operator presents each assembly to the heating outlet.
Adjust the 580 L/min airflow and heating time to the sleeve and cable for a repeatable bench heating procedure.
Use sensor, foot-pedal or timed operation to suit how parts are presented at the workstation.
We set the voltage for your country and ship the English interface and manual.
For wear parts, every quote lists them with unit price and the location they ship from.

What it processes

Heat shrinking pre-positioned insulation sleeves on prepared wire ends
Repeated bench heating of cable joints and terminal assemblies
Local sleeve recovery during wire-harness assembly

The WM-684 suits a bench process in which an operator presents a prepared cable end to a fixed hot-air outlet. The heater and blower deliver the heating cycle while the selected sensor, pedal or timed mode controls the start.

Send a complete sample with the sleeve already positioned and identify nearby connector plastics or insulation that need protection. We record the outlet setup, heat setting and cycle time, then show the recovered sleeve and the surrounding assembly. For a WM-684 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.

Engineering knowledge

Choose and troubleshoot this process

Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-684 — common questions

How do we select the nozzle and heating length?

Send the sleeve diameter, sleeve length and the cable or connector around it. The outlet geometry and heating time are matched to that assembly. We show sleeve recovery and the surrounding insulation during the sample trial.

Does it require a compressed-air connection?

The electric hot-air station uses its built-in blower. We confirm the electrical supply and the selected outlet arrangement on the quote.

How do the bench stations differ?

For sleeves up to Ø45 mm, see WM-684. The WM-682 uses 335 L/min airflow, while WM-683 specifies 580 L/min with the same 0–30 mm diameter range.

How do we verify production output?

We time a trial with your assembly and operator loading method. Heating time, sleeve material and handling determine the completed-piece rate.

What comes with the quote?

We set the voltage for your country and ship the English interface and manual. For wear parts, every quote lists them with unit price and the location they ship from.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.