Dual-Belt Heat Shrink Machine with Ceramic Heaters, 350 × 100 mm WM-6117
Our WM-6117 uses crawler-belt transport and double-sided ceramic heating blocks for heat shrink sleeves positioned on wire harnesses, including mid-harness joints. The heating area is 350 × 100 mm, with a 0–6 m/min conveyor speed and a 0–500 °C temperature setting range. The machine is rated at 2.0 kW on 220 V, 50 Hz. We trial the sleeve and assembly together to confirm exposure and transport support.
Specifications
| Model | WM-6117 |
|---|---|
| Machine dimensions (L × W × H) | 1100 × 230 × 350 mm |
| Heating area (L × W) | 350 × 100 mm |
| Machine weight | 60 kg |
| Conveyor speed | 0–6 m/min |
| Power | 2.0 kW |
| Heating temperature setting range | 0–500 °C |
| Heating arrangement | Double-sided heating |
| Heating elements | Ceramic heating blocks |
| Power supply | Reference configuration: 220 V, 50 Hz |
| Electrical configuration | We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites. |
| Lead time | Your quote confirms the machine configuration, included accessories and dispatch date. |
| Warranty and support | One-year machine warranty and free remote video support for the life of the equipment. |
| Wear parts | For wear parts, every quote lists them with unit price and the location they ship from. |
| HS Code | 8419.89 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Move the prepared harness through the heating area on crawler belts to give the sleeve region a repeatable pass.
- Apply heat from both sides with ceramic heating blocks; we confirm the sleeve recovery and surrounding insulation on the actual assembly.
- Adjust belt speed over 0–6 m/min to match residence time to the chosen sleeve and loading arrangement.
- We set the voltage for your country and ship the English interface and manual.
- For wear parts, every quote lists them with unit price and the location they ship from.
What it processes
- Heat shrinking sleeves already positioned on wire harnesses
- Mid-harness splice and joint sleeve processing
- Conveyor heating trials for prepared wire assemblies
The WM-6117 combines controlled conveyor exposure with double-sided ceramic heating for prepared harness assemblies. The process heats a selected sleeve region; we check how the remaining wire and connectors travel through and around the supported path.
Temperature and belt speed are selected together on the actual material. Send the sleeve specification, complete harness geometry and intended loading pattern so we can confirm the working clearance and show the finished recovery in a sample trial. For a WM-6117 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.
Engineering knowledge
Choose and troubleshoot this process
- Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
- How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.
WM-6117 — common questions
What workpiece dimensions should we send?
The listed heating area is 350 × 100 mm. Send the sleeve length and diameters, harness length, connectors and any branch points. We confirm the supported transport path and heating clearance with the complete assembly.
How do we choose the temperature and conveyor speed?
The setting range is 0–500 °C and conveyor speed is 0–6 m/min. These are adjustment ranges. We trial your sleeve and complete assembly to establish the temperature and residence time, checking recovery and the surrounding insulation.
Can the machine process sleeves in the middle of a harness?
This crawler-belt heating arrangement is intended for mid-harness sleeve work. We check the location of the joint, connector clearance and support for the remaining harness before confirming the configuration.
What electrical supply does this model use?
The specification lists 2.0 kW and 220 V, 50 Hz. We confirm the supply for the installation and set the voltage for your country, and ship the English interface and manual.
Can we see a trial with our own harness?
Send the complete assembly with the sleeve positioned and your required finished result. We film the heating pass and show the finished sleeve before you confirm the machine. For wear parts, every quote lists them with unit price and the location they ship from.
Related machines in Heat Shrink & Tube Insertion
Adjustable-Span Suspended Heat Shrink Conveyor Oven
Model WM-6107
Aluminum-Frame Bench Heat Shrink Conveyor Oven, 800 × 400 × 150 mm
Model WM-690
Aluminum-Frame Heat Shrink Conveyor Oven, 1200 × 400 × 150 mm
Model WM-698