Compact Infrared Batch Oven for Heat Shrink and Curing, 340 × 300 × 150 mm WM-6111

Name: Compact Infrared Batch Oven for Heat Shrink and Curing, 340 × 300 × 150 mm WM-6111
Brand: Wiromac
SKU: WM-6111

CE Certified HS Code 8419.89 Heating space 340 × 300 × 150 mm Chamber load 10 kg

Get a quote for WM-6111 →

Our WM-6111 provides a 340 × 300 × 150 mm heated space for heat shrinking, small-part rework and adhesive-curing trials. The infrared oven uses single-sided heating with a 0–260 °C setting range and a listed 10 kg chamber load. Its rated power is 1.0 kW on a 220 V, 50 Hz supply. We establish the actual temperature and dwell time with your material.

Specifications

Model	WM-6111
Machine dimensions (L × W × H)	400 × 350 × 500 mm
Heating space (L × W × H)	340 × 300 × 150 mm
Machine weight	20 kg
Power	1.0 kW
Chamber load	10 kg
Heating temperature	0–260 °C
Heating / temperature control	Single-sided heating
Heating elements	Far-infrared heating tubes
Power supply	Reference configuration: AC 220 V, 50 Hz
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
HS Code	8419.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Place work within the 340 × 300 × 150 mm heating space and control batch exposure instead of heating each piece separately.
Use single-sided infrared heating and an adjustable temperature setting for a repeatable approved batch procedure.
Choose batch loading to suit the workpiece shape, material and the 10 kg chamber load.
We set the voltage for your country and ship the English interface and manual.
For wear parts, every quote lists them with unit price and the location they ship from.

What it processes

Batch heat shrinking of prepared small cable assemblies
Heating trials for small molded-part rework
Temperature-controlled adhesive-curing trials on suitable parts

The WM-6111 is a batch oven for heat shrinking, small-part rework and adhesive-curing trials. Loading density and the thermal mass of the parts affect the exposure needed, so the material trial establishes the working temperature and dwell time.

Send the full part or coil dimensions, batch mass and required result. We confirm chamber clearance and the loading arrangement, then show the heated batch result on video before ordering. For a WM-6111 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.

Engineering knowledge

Choose and troubleshoot this process

Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-6111 — common questions

What is the usable heating space?

The listed heated space is 340 × 300 × 150 mm, and the chamber load is 10 kg. Allow room around the complete part and confirm the loading pattern during the trial.

Does the maximum setting define the material recipe?

The oven setting range is 0–260 °C. The actual recipe depends on the material, part mass and loading arrangement. We verify the part result and dwell time with your samples.

Which neighboring oven should we compare?

Compare WM-6112 for the alternative chamber or heating arrangement. Choose the working space and heating coverage for the complete batch rather than the outside cabinet dimensions.

Can it warm an entire wire coil?

For warming complete wire coils, compare our WM-6113 and WM-6114 chamber formats and send the coil dimensions and material.

What is confirmed before shipment?

We set the voltage for your country and ship the English interface and manual. For wear parts, every quote lists them with unit price and the location they ship from.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.