Chain Conveyor Heat Shrink Oven for Busbars, 3000 mm Heating Zone WM-6110

Name: Chain Conveyor Heat Shrink Oven for Busbars, 3000 mm Heating Zone WM-6110
Brand: Wiromac
SKU: WM-6110

CE Certified HS Code 8419.89 Heating space 3000 × 620 × 200 mm Chain load 100 kg

Our WM-6110 carries insulated busbars and heavy assemblies through a 3000 × 620 × 200 mm heated passage on a chain conveyor. The machine uses radiant heating and a 0–300 °C setting range. Conveyor speed adjusts over 0–6 m/min with a listed 100 kg load. We test the sleeve and complete assembly to establish the temperature and residence time.

Specifications

Model	WM-6110
Machine dimensions (L × W × H)	4000 × 700 × 1250 mm
Chamber dimensions (L × W × H)	3000 × 700 × 330 mm
Heating space (L × W × H)	3000 × 620 × 200 mm
Machine weight	550 kg
Conveyor speed	0–6 m/min
Power	33 kW
Conveyor load	100 kg
Conveyor belt material	Chain conveyor
Heating temperature	0–300 °C
Heating / temperature control	Double-sided heating; 3 groups / 6 temperature-control sets
Heating elements	Radiant heating tubes
Hot-air circulation blower	Included
Cooling device	Included
Power supply	Reference configuration: 380 V, 50 Hz
Electrical configuration	We configure the machine’s electrical supply for your installation before shipment. Your quote confirms the voltage, phase, frequency, current and the power cord with plug or industrial connection for your site. Common site supplies are 120 V, 60 Hz with grounded Type B outlets in the US and Canada, with 208 V or 240 V also found at industrial sites. The UK and Ireland use 230 V, 50 Hz with Type G. Australia and New Zealand use nominal 230 V, 50 Hz with Type I, and some Australian sites list 240 V. Three-phase installations in the UK, Ireland, Australia and New Zealand commonly use 400 V at 50 Hz, with 415 V at some Australian sites.
Lead time	Your quote confirms the machine configuration, included accessories and dispatch date.
Warranty and support	One-year machine warranty and free remote video support for the life of the equipment.
Wear parts	For wear parts, every quote lists them with unit price and the location they ship from.
HS Code	8419.89 (common reference — final classification confirmed by your customs broker)
Certification	CE (certificate provided with shipment)

Key features

Use the 3000 × 620 × 200 mm heated passage to select by the full part clearance, including connectors and fitted sleeves.
Match heating exposure to the sleeve by adjusting conveyor speed over 0–6 m/min and recording the approved setup.
Carry work on the chain conveyor with a listed 100 kg load; we confirm the loading pattern with the actual assembly.
We set the voltage for your country and ship the English interface and manual.
For wear parts, every quote lists them with unit price and the location they ship from.

What it processes

Heat shrinking insulation sleeves on busbars
Heating sleeved heavy cable and power assemblies
Conveyor processing of prepared parts within the confirmed heating space

The WM-6110 matches a chain transport system to heavy busbar work. Heating space, loading pattern and residence time are selected together so the sleeve can recover while the surrounding assembly is checked.

This build uses a conveyor support frame. Send the line layout and the full workpiece dimensions so we can confirm the conveyor arrangement and installation space.

For an approval trial, send the complete assembly with the sleeve positioned. We film the heating pass and show the finished recovery before ordering. For a WM-6110 quote, share the sleeve size and the approximate dimensions of the part it covers. We'll check which configuration fits your assembly.

Engineering knowledge

Choose and troubleshoot this process

Heat Shrink Defects: Causes and Corrective ActionsTroubleshoot incomplete recovery, wrinkles, splits, scorching, sleeve movement, trapped air, uneven adhesive flow and heat damage.
How to Choose Heat Shrink Processing EquipmentChoose heat shrink equipment by sleeve material, recovered dimensions, adhesive requirement, harness geometry, heating method, takt time and validation plan.

Compare configurations before you order Tell us what you need to make. We’ll help you shortlist the equipment and identify which tooling and accessories to include in your quote. Help me choose a machine →

WM-6110 — common questions

How do we select the working space?

The heated passage is 3000 × 620 × 200 mm. The complete part, fixtures and sleeves must fit the confirmed loading pattern.

How do we set temperature and conveyor speed?

We run the actual sleeve on the complete assembly and adjust heating and belt speed to verify sleeve recovery and the surrounding insulation. The approved values and loading arrangement are recorded for the job.

Which configuration should we compare?

For lighter assemblies on a PTFE belt, compare WM-6102 or WM-6103. The chain conveyor here is specified for a 100 kg load.

What is included in the electrical and spare-parts confirmation?

We set the voltage for your country and ship the English interface and manual. For wear parts, every quote lists them with unit price and the location they ship from.

Can we see our own assembly processed?

Send the sleeve material, starting and recovered diameters, sleeve length, complete part dimensions and expected batch volume. We film a trial and show the heated assembly before you confirm the machine.

Get a price in 12 hours

Tell us what you’re making or share an approximate material size. We’ll quote a suitable configuration so you can compare price, included equipment and dispatch timing. Photos and drawings can follow.

Your quote and delivery

Configuration and dispatch: Your quote confirms the machine configuration, included accessories and dispatch date.
Voltage and language: We configure the electrical supply for your installation and confirm the voltage, phase, frequency and power cord with plug or fixed connection on your quote. We ship the English interface and manual.
Your material, on video: Send your material sample. We confirm the acceptance criteria with you and record the trial before shipment.
Wear parts: For wear parts, every quote lists them with unit price and the location they ship from.
Warranty and support: One-year machine warranty and free remote video support for the life of the equipment.

Warranty parts, freight and consumables

If you want spares on hand from day one, ask us to include the matching wear parts in your machine shipment. Blades and dies are consumables. We supply covered replacement parts during warranty, and the buyer pays their international freight.