Compact Copper Tape Wire Splicing Machine with 3-Ton Crimp Force WM-715

Name: Compact Copper Tape Wire Splicing Machine with 3-Ton Crimp Force WM-715
Brand: Wiromac
SKU: WM-715

HS Code 8463.90 One splice per trigger

The WM-715 splices stripped wires by crimping a sleeve of continuous copper tape around the gathered strands — feeding, cutting and closing the joint in one cycle at a rated 3-ton crimp force. A digital panel gives an LED piece counter, tape-feed jog and switchable manual or foot-pedal triggering, and the low-noise drive lets the compact, bolt-down machine work right beside assembly benches. It replaces solder and pre-formed splice terminals on lamp, switch, sensor and heating-element connections.

Specifications

Function	Copper tape wire splicing — feed, cut and crimp continuous copper tape in one cycle
Crimping force	3.0 T (rated)
Noise class	Ultra-quiet crimping drive for bench-side operation
Operation mode	Manual or foot-pedal trigger, selectable on the panel; pedal included
Tape feeding	Motorized gear feed with jog (Feed) key, running behind a transparent guard
Counter	Digital LED piece counter with zero, set and up/down keys
Cooling	Fan-cooled motor drive
Mounting	Benchtop unit on a bolt-down base plate
HS Code	8463.90 (common reference — final classification confirmed by your customs broker)
Certification	On request

Key features

One trigger press feeds, cuts and crimps the copper tape — a finished splice every cycle with no pre-formed splice terminals to purchase or stock
Digital control panel keeps the piece count honest across shifts and jogs the tape feed for quick reel changes; manual and pedal modes switch at a key press
Low-noise crimping drive runs quietly enough to sit beside operators on the assembly bench instead of in a press room
Compact bolt-down footprint — the smaller sibling of our 4-ton WM-716 for lighter, bench-scale splicing work

What it processes

Splicing lamp, switch and sensor leads in appliance and lighting assembly
Connections onto heating elements and thermosensitive components where solder heat is unwelcome
Two-wire gathers and lead extensions in wire harness prefabrication that would otherwise need solder or splice terminals

Suited for: cold splicing of stripped appliance-gauge wires with continuous copper tape — lamp, switch, sensor and heating-element leads where solder heat or flux is unwelcome and pre-formed splice terminals cost too much per joint. Not suited for: crimping standard insulated or open-barrel terminals or any solder work — for terminals, pick from our terminal crimping machines; for metallurgical splices or larger cross-sections, use the WM-711 ultrasonic wire welding machine or the heavier WM-716 copper band splicer in the same category.

Send 2–3 meters of each wire in your splice combination, and we crimp your actual joints on this machine — with the result on video — before you commit to the order.

Engineering knowledge

Choose and troubleshoot this process

Ultrasonic Wire Welding Defects: Causes and Corrective ActionsTroubleshoot weak wire splices, cut strands, excessive flash, incomplete bonding, unstable weld energy, tool marking and conductor contamination.
How to Choose an Ultrasonic Wire Welding MachineChoose ultrasonic wire welding equipment by conductor material, gathered cross-section, splice geometry, weld power, tooling, recipe control and acceptance testing.
Wire Soldering Defects: Causes and Corrective ActionsTroubleshoot non-wetting, excessive solder wicking, bridging, burnt insulation, unstable tinning depth, residue and contaminated wire solder joints.

Neither machine quite fits? New configurations reach our application engineers before they reach the catalog. Tell us your material and process; we will confirm what we manufacture and support, then recommend the right configuration. Get a tailored recommendation →

WM-715 — common questions

How is the WM-715 different from the WM-716 copper band splicer?

Both crimp continuous copper tape around stripped wires in a single action. The WM-715 is the compact bench unit with a rated 3-ton crimp force, sized for appliance-gauge leads next to an operator. The WM-716 is the heavier 4-ton station for larger bundles and harder duty cycles. If your splice combination sits near the boundary, send samples and we run them on both.

What wires and copper tape does it take?

It runs continuous copper tape from a reel through the motorized gear feed and crimps it around stripped, gathered wires — typical work is two appliance-gauge leads joined side by side, as in the sample photos. Tape width and wire combinations are confirmed against your actual samples — send 2–3 meters of each wire and we crimp your joints on video before you order.

What is it not built for?

It does not crimp insulated or pre-formed terminals — that is a job for a terminal crimping machine — and it makes a mechanical joint, not a metallurgical weld. For welded splices, see the WM-711 ultrasonic wire welding machine (0.75–20 mm²) or the other wire soldering and welding machines beside this splicer.